ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Restoring Little Bluey - my 182 FF ClioSport in Racing Blue



Mr Underhill

ClioSport Club Member
Well due a refresh, look at how scruffy that engine bag looks.. 😂
IMG_5072.jpeg


200.gif
 

Mr Underhill

ClioSport Club Member
Spring, my arse. It started bloody raining on the one day I began working on my car. 😤

Still, I managed to get the bumper off - I hate doing this on my own - and the radiator, condenser, and dryer. The ECU is out, and I removed some inner liners to check for corrosion.

IMG_5078.jpeg
IMG_5076.jpeg
IMG_5068.jpeg


Everything looks dandy, with only the odd bit of surface rust on some bolts, clips, and around where the slam panel secures. These are easy fixes. It’s all just very dusty, primarily from where I store it.

I’m quite relieved to see no oil on the sump guard—again, just dusty. The underneath is also still nice, dry, and rust-free.

IMG_5069.jpeg
IMG_5070.jpeg


I’m pretty pleased and relieved at the same time. It’s not a show car by any stretch, but it’s a solid, rust-free little car and should last a few more years yet.

Having a cuppa and waiting for the rain to do one.
 

Colin-S

ClioSport Club Member
  172 Cup
Lovely well looked after car Jon!

You'll have those airbox torx screws back to new in no time.

Are you going back to a black for the ECU bracket / airbox bracket?

Do you have a replacement lower fuse box housing - that clip always breaks 😢

Easter Monday = It was always gonna rain...lol
 

Mr Underhill

ClioSport Club Member
Lovely well looked after car Jon!
Thanks Colin.
You'll have those airbox torx screws back to new in no time.
Yeah those are soaking in some DEOX-C right now and will be getting the Gun Oil treatment..again!
Are you going back to a black for the ECU bracket / airbox bracket?
Yes, both repainted Black.
Do you have a replacement lower fuse box housing - that clip always breaks 😢
I snapped it a few months back and was proper peeved off. I’ve broken 3 now in 7 years. It’s not bothering me too much at the moment, but if you come across any good ones, please let me know.
Easter Monday = It was always gonna rain...lol
Typical!
 

Mr Underhill

ClioSport Club Member
The rain hasn’t stopped, so I did some work in the garage. I bought a load of new bolts and clips to attach the new condenser to the new radiator and then to the fan shroud. As usual, the missus has been messing about in there and thrown her stuff everywhere, so I couldn’t find them.

Being an impatient old git, I reused the old ones—thank God I’d soaked them in Deox-C three years ago, so they didn’t put up a fight.

Old condenser, dryer and Radiator

IMG_5079.jpeg
IMG_5080.jpeg
IMG_5081.jpeg


New condenser, dryer, radiator and seal kit.

IMG_5083.jpeg
IMG_5086.jpeg
IMG_5087.jpeg
IMG_5082.jpeg


A bit of a story behind the condenser and seal kit, as I’d bought them many years ago for my old Black Gold 182. When I sold it on here, I gave them away with the car for free, then ended up buying them back like the bloody idiot I am. 🤣

Anyway, that’s as far as I got. Going to have a cuppa, hot bath and another go tomorrow. Thank you for reading.
 

Brigsy

ClioSport Club Member
  T.Turbo
Looks spot on John, its held out great considering a few years since the refresh.

Keep an eye on coolant temps with new rad on as the core is a different design to oem. I have tried similar new style core on my meg and it was getting hot as fcuk so changed back to used oem and its been fine since.
 

Mr Underhill

ClioSport Club Member
Looks spot on John, its held out great considering a few years since the refresh.

Keep an eye on coolant temps with new rad on as the core is a different design to oem. I have tried similar new style core on my meg and it was getting hot as fcuk so changed back to used oem and its been fine since.
I fitted one of these on my Black Gold track car and it was spot on Jon. It looks identical but I’ll keep an eye on it.
 

Mr Underhill

ClioSport Club Member
Early start to put it all back together.

IMG_5090.jpeg


No dramas - everything went according to plan. I spent most of the time going over everything and cleaning up as I went.

IMG_5099.jpeg


New ECU bracket installed—thanks, @Colin-S . The old one had caused a few scratch marks due to some movement, so I touched those up.

IMG_5100.jpeg


I got the airbox and screws back to black again.

I took my time refilling and bleeding the system. I let it run hot, and the thermostat is all good, with the fans kicking in.

IMG_5107.jpeg


I had a good look at the steering knuckles and hubs, and they’re still in amazing condition, so I’ve decided to leave them alone. The geometry is set up perfectly on this car; it’s so smooth and straight. With the MOT just a few weeks away, the last thing I want to do is mess around trying to find a competent garage to set it up properly again. As the old saying goes, “If it ain’t broke, don’t fix it.”

I have a few small jobs to do and it needs a proper clean, then I’ll give it a good run out tomorrow. Thank you for reading.
 


Top