The Fatty's KTEC alternative induction setup that works just as well!

[imprezaworks]

Fatty kit number 103

 

[imprezaworks]

Filter I used was CC-501-70

The bend from tweeks. Both parts are larger than the norm and fit wise is spot on

 

[ADS_V6]

Fatty kit number 103

looks spot on.Any chance of a in car vid of above 30mph if the rb goes above that 😂

 

[imprezaworks]

You couldn't handle the power, soz.

 

[ADS_V6]

You couldn't handle the power, soz.

Wouldn't have that filter of I hadn't mentioned it git

 

[Stay Puft]

Fatty kit number 103

Bloody hell, why have you bought another one haha! I assume your old one has arrived at my parents, I have a couple of parcels apparently..

 

[imprezaworks]

It has arrived mate . The phase 1 Airbox was a bit too quiet

 

[Stay Puft]

It has arrived mate :smile:. The phase 1 Airbox was a bit too quiet

Haha cheers again. How much was the one youve just fitted total?

 

[imprezaworks]

£20 filter
£15 bend

 

[Jekyll]

Done mine recently. I prefer the old ITG filter I had before though.

Anybody used a cotton gauze filter on this style setup?

 

[MrBlonde]

I came across this pipe a while ago.

 

[ADS_V6]

It has arrived mate :smile:. The phase 1 Airbox was a bit too noisy and Iam getting old this year and suffering hearing loss U WHAT

 

[Jekyll]

Hmm, not sure what to do now.

 

[andyj007]

fitted mine yesterday, took all off 15mins and removed the acoustic valve.... sounds E.P.I.C best £35 quid mode ever
more beers owed to original poster

 

[Jekyll]

 

[MrBlonde]

Might change my filter soon for a green cotton one as pipercross one is getting a bit worn.I had green cotton one on my 205 & really liked it.

 

[edwarj123]

£20 filter
£15 bend

:smile:

Hi Dan, is that all I need to change from a standard air box and filter I have? Do you have links to the parts you got please? It looks pretty cool and I bet it sounds great. Thanks, Justin

 

[andyj007]

what i got

http://www.ebay.co.uk/itm/390629059729?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
http://www.ebay.co.uk/itm/200967481...49&var=500188046145&ssPageName=STRK:MEBIDX:IT

 

[Poopensharten]

Is it just the same parts i need for a phase 1??

 

[andyj007]

i dont know.. some one will be along soon who does tho..

 

[Bluebeard]

Is it just the same parts i need for a phase 1??

Yes.
Keep your standard plastic elbow, buy the alloy pipe and a filter plus some jubilee clips and bask in induction noise.

 

[andyj007]

er noise? you mean roar :smile:
the clio becomes mighty..

 

[Poopensharten]

Yes.
Keep your standard plastic elbow, buy the alloy pipe and a filter plus some jubilee clips and bask in induction noise.

Thanks Dan x

 

[Jekyll]

If you decide to go down the silicone route, I've got a few pics on a few pages back of my old ph1 setup including breather filter and dimensions.

@Danny_172

 

[+Doc+]

Been told this will lose BHP on the track, is this correct?

 

[N4TH4N]

Been told this will lose BHP on the track, is this correct?

I've always wondered this but apparently it doesn't suffer heat soak due to where it's located. Ie receiving a sufficient amount of cold air

 

[gralegav]

Might change my filter soon for a green cotton one as pipercross one is getting a bit worn.I had green cotton one on my 205 & really liked it.

I've got this setup on mine, with a green cotton filter, but was like that when I bought it. All I know is that it sounds great and feels fast!

 

[N4TH4N]

£20 filter
£15 bend

:smile:

What you using, Dan?

 

[imprezaworks]

Ordered the bend from demon tweeks and the filter from ramair direct. If you ring ask to speak to Ryan, really helpful and will know what you want. Can get you the part Tomo at some point but it's £20 delivered

 

[N4TH4N]

Ordered the bend from demon tweeks and the filter from ramair direct. If you ring ask to speak to Ryan, really helpful and will know what you want. Can get you the part Tomo at some point but it's £20 delivered

Got any links mate, getting the itch for some more sound.

 

[imprezaworks]

Can do Tomo mate

 

[N4TH4N]

Can do Tomo mate

Thnx dude.

 

[Karlos182]

what i got

http://www.ebay.co.uk/itm/390629059729?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
http://www.ebay.co.uk/itm/200967481273?_trksid=p2057872.m2749.l2649&var=500188046145&ssPageName=STRK:MEBIDX:IT

What specifications did you select for the alloy bend?

 

[andyj007]

here you go
90 Degree Alloy Elbow Bend Metal Pipe Swaged Polished
( 200967481273 )
External Diameter: 70mm

Swaged Ends (Beaded): Yes

Leg Length: 150mm

 

[imprezaworks]

Filter from ramair

Cc501-70

 

[Jimbob 2705]

Been meaning to get one of these for ages, so bought the bits today to give it a try...

If I like it I'll probably get a silicone 90 degree elbow to use instead of the plastic one...any ideas what I'll need?

@imprezaworks same as yours but in black, or purple if possible

 

[imprezaworks]

Search ebay or similar mate

 

[Jimbob 2705]

Search ebay or similar mate

Don't suppose you know what size?

 

[imprezaworks]

70mm iirc mate

 

[imprezaworks]

https://www.ebay.co.uk/itm/361387124553