The Fatty's KTEC alternative induction setup that works just as well!

[Hastie]

As above, you need a ally joiner to fit from you filter to your silicone bend. Its in the link a few posts up :smile:

Sorry Jekyll, i cant imagine how a joiner can help me. Im trying to do with steel pipe, not silicone, so I think my solution is to change the 76mm steel pipe to a 70mm and its done.

 

[Jekyll]

Ah sorry, my apologies. I thought you had the silicone pipe!

Yes, you need to have a 70mm ally pipe. It's the only size you need.

 

[Hastie]

Ah sorry, my apologies. I thought you had the silicone pipe!

Yes, you need to have a 70mm ally pipe. It's the only size you need.

Well, I wrote a message to the vendor on ebay but I am waiting for reponse. I hope they will send me the 70mm for free because its their fault, and I think I shouldn't pay anything.

 

[Jekyll]

If they have made the mistake and you ordered 70mm amd received 76mm, then yes they should.

 

[Lokkdogg]

Thanks I've just ordered mine!

 

[truckracing]

Hello, anyone have a link to a tube that does not have any brand and is chrome and smooth whole?

I do not like to see that mark (ASH) in the middle of the elbow.

http://www.ebay.com/itm/200967481273?clk_rvr_id=1080521122344&afsrc=1&rmvSB=true

 

[MRBILLYUK]

Hello, anyone have a link to a tube that does not have any brand and is chrome and smooth whole?

I do not like to see that mark (ASH) in the middle of the elbow.

http://www.ebay.com/itm/200967481273?clk_rvr_id=1080521122344&afsrc=1&rmvSB=true

Iirc , The Ash name is only on one side , so you can turn it over and you won't see it :tonguewink:

 

[Timmyjk7]

Got mine fitted this weekend. What an improvement all round. Seems to have improved throttle response dramatically.

 

[16v-clio]

Got mine fitted this weekend. What an improvement all round. Seems to have improved throttle response dramatically.

Looks good, Which size filter are you using? Mine looks tiny! Also, your coolant looks pretty low!

This is my third week week waiting on my pipe, shocking service from ASH

 

[Timmyjk7]

Dont worry coolant now all topped up

My filter - http://www.ebay.co.uk/itm/390629059729

Pipe - http://www.ebay.co.uk/itm/331657036706

The pipe came within a few days.

 

[16v-clio]

Dont worry coolant now all topped up :smile:

My filter - http://www.ebay.co.uk/itm/390629059729

Pipe - http://www.ebay.co.uk/itm/331657036706

The pipe came within a few days.

Haha good stuff! Aye ok, my filter is the same, might look bigger when it's in the bay!
My pipe apparently went missing then communication tailed off so a couple phone calls and there was another sent on Tuesday. Still no sign of mine but I've had someone else's order turn up in the mean time... Shame it's the wrong size!

 

[truckracing]

Pipe - http://www.ebay.co.uk/itm/331657036706
.

I am looking for this same article in the shop of eBay but I it I want to of color black.

Me could you give the link? I'm looking for it and I don't see it.

Thank you!

 

[Jekyll]

http://www.ebay.co.uk/itm/Black-Sil...548951&hash=item2c71f27e8d:g:BZQAAOxyhTFSQVA-

http://www.ebay.co.uk/itm/Blue-Blac...279365&hash=item2ecbbccfdb:g:bRcAAOxygj5SgOav

Not as cheap as the blue ones mind.

 

[16v-clio]

ASHHOSES for 15% off online at Auto Silicone Hoses

 

[BGEarles]

Got mine fitted this weekend. What an improvement all round. Seems to have improved throttle response dramatically.

Where did you get those fancy bolts from? [emoji87][emoji4]


Sent from my iPhone using Tapatalk

 

[Karlos182]

Where did you get those fancy bolts from? [emoji87][emoji4]


Sent from my iPhone using Tapatalk

I saw them on eBay the other week, for a tenner

 

[RIC172]

Has anyone else had any before and after rolling roads done with this induction kit? (Other than fatty). I'm considering adding this induction kit but I'm yet to be convinced I'll get any more power out of it than my standard air box.

 

[imprezaworks]

Mine ran 183 with the kit, decat and ktec unsilenced system. I won't be removing it

 

[RIC172]

I don't blame you, that's a good bhp figure so why change anything. I'd love to know exactly how much gains it produced though. As this is such a cheap mod it'd probably be worth me giving it a try and if I'm not happy I'll just out it back to normal

 

[imprezaworks]

It sounds great and doesn't lose power, probably minimal gains in truth. Oh and it's less than £50.

 

[Lokkdogg]

Honestly I can feel a difference in it. It does seem to be a bit faster, plus it sounds really good, it was only £40 and I fitted it in 10 mins. Recommend it to anyone! Very impressed.

 

[BuCkLeY...]

Hi so I need 70mm pipe, with swaged ends and 150mm in length?

 

[imprezaworks]

@Dr Jekyll

I forget what it is now but mark posted the links a few pages back iirc

 

[Jekyll]

Hi

If you type 70mm ally joiner you will find your poison!

 

[Jekyll]

http://www.ebay.co.uk/itm/Aluminium...hash=item2c71a1d9ab:m:mhPwcOjv1lF198ByGZ-FVFA

@BuCkLeY...

 

[loggyboy]

Assuming you want to replicate the setup discussed at length here, you need a 70mm pipe with a 90degree bend.

 

[Jekyll]

Yes. I actually read the post wrong, hence my link to the joiner!

 

[RSCaulay]

This might be a stupid question but does the crankcase breather connect to anything?

 

[Jekyll]

Only the back of the inlet.

 

[loggyboy]

Yeah you retain the standard 90degree off the TB which has the breather connection.

 

[Jekyll]

Crankcase breather is only needed if you ditch the original 90 degree bend and have a silicone one instead, as it'll have no breather pipe attached.

 

[RSCaulay]

I have a silicone bend with breather, but it's just dangling at the back of the engine. I wasn't sure was it supposed to be fixed to something

 

[rs1903]

Anyone know if these Ramair filters need oiled before fitting?

 

[ripp]

I would put some oil on them if they feel dry to the hand. I use Motorex Foam filter oil

 

[imprezaworks]

@The Fatty


Is back in the room

 

[Stay Puft]

Still need to fit the one I bought from you @imprezaworks !

 

[The Fatty]

Anyone know if these Ramair filters need oiled before fitting?

Apparently they are pre-oiled between the layers.

 

[The Fatty]

Glad to see people are still finding this thread useful I never thought when writing my original post that so many people would even read it let alone use it! I'm still working on my next project (it's been a long time in the works), if it ever gets completed I'll create a similar thread

 

[imprezaworks]

What's the new product?

 

[Clio_fool]

@The Fattty this has probably been THE most used thread on cliosport. And saved us all a s**t load of money. Cheers fella.