ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
The Lunar Grey Mk1 Hybrid Project
- Thread starter Zmaster2k
- Start date
Lunar Mk1 & Flamer
ok today we got the wilwoods on... took much longer than expected due to all eight bleed nipples being gunked up....nice! still need a propper bleed will do so when we get the 5.1 fluid in. only running dot4 atm.
sorted all earth problems we've had since respray. Turns out id bolted an earth to an alloy mount... tit!
started strip down of interior ready for cage installation soo removed all carpet and sound proofing. will be pulling dash out tomorrow. JOY... this is gonna be a fun job. lol.
Then that will proberly be the end of the updates for the while... while i save for the next stage of the car... getting cage fitted. then painted.
few shots from progress today!
and my brother who thinks this looks like him lifting the car up lol
sorted all earth problems we've had since respray. Turns out id bolted an earth to an alloy mount... tit!
started strip down of interior ready for cage installation soo removed all carpet and sound proofing. will be pulling dash out tomorrow. JOY... this is gonna be a fun job. lol.
Then that will proberly be the end of the updates for the while... while i save for the next stage of the car... getting cage fitted. then painted.
few shots from progress today!
and my brother who thinks this looks like him lifting the car up lol
Lunar Mk1 & Flamer
Soo todays updates (for those interested in the genesis of the cliosport)
firstly removed the top dash
then after much fiddling unscrewing un bolting etc etc we got the dash out.
add to pile of rubbish so far
well you get the idea.. we had a good chat over a bad coffee from the vending machine and discussed the next stage of the car which is the cage... and what the colour code should be...
but we have got everything out ready for cage fitting. will update more then.
car drives now anyway.. gave her a quick rip about in the industrial estate as i missed her power
we have left the loom in, this will be removed for painting..
thats it for now folks.
firstly removed the top dash
then after much fiddling unscrewing un bolting etc etc we got the dash out.
add to pile of rubbish so far
well you get the idea.. we had a good chat over a bad coffee from the vending machine and discussed the next stage of the car which is the cage... and what the colour code should be...
but we have got everything out ready for cage fitting. will update more then.
car drives now anyway.. gave her a quick rip about in the industrial estate as i missed her power
we have left the loom in, this will be removed for painting..
thats it for now folks.
Nafoff
ClioSport Club Member
you now look like a pikey....wtf?...lol
Looking at this just makes me genuinally miss having a mk1 project kicking about!
Lunar Mk1 & Flamer
Ok sabelt seat was refunded as it was taking too long :-( so more cash to spunk on shell
After bleeding my 4 pots thought I better just check level of fluid.
Wait a minute I don't remember the reservoir being that close to the engine
Then all my mounts are ok.. Or are they DOH
Now I realise why it was a bit of a pig to select reverse lol
Oh well another new part Lolololol
Another update tomorrow
After bleeding my 4 pots thought I better just check level of fluid.
Wait a minute I don't remember the reservoir being that close to the engine
Then all my mounts are ok.. Or are they DOH
Now I realise why it was a bit of a pig to select reverse lol
Oh well another new part Lolololol
Another update tomorrow
A bit of a pig?! Im amazed you got reverse! Thats about as broken as you can get them!!
Punto/Clio GTT
dedication! the colour looks like the one used on the escort rs turbos, dunno if the fiesta used it too
be good to see it finished, looks like lot of man hours spent on it!
be good to see it finished, looks like lot of man hours spent on it!
Lunar Mk1 & Flamer
Ok quick update:-
After ripping my top mount in half
I replaced it with a nice new KTR uprated mount
Then thought as its Xmas eve I'll do summit to get me out the house (humbug I hate Xmas lol)
So primered up 1 wheel with red oxide primer
Then applied coat of capsicum red
Then another coat and some lacquer
That's it now will fit it up when dry. Then it's off for cage to be fitted
Ok here we go....opinions...
After ripping my top mount in half
I replaced it with a nice new KTR uprated mount
Then thought as its Xmas eve I'll do summit to get me out the house (humbug I hate Xmas lol)
So primered up 1 wheel with red oxide primer
Then applied coat of capsicum red
Then another coat and some lacquer
That's it now will fit it up when dry. Then it's off for cage to be fitted
Ok here we go....opinions...
Punto/Clio GTT
dont think the red wheels suit it mate! i reckon anthracite or some other dark grey wheels will look alot better, possibly with polished lip
Last edited by a moderator:
Subaru impreza
I like the red wheels i think there should stay
SG 200 Cup+F4R'd MK1
I like the red wheels. Needs lowering massively! Will look tops then!
Last edited by a moderator:
SG 200 Cup+F4R'd MK1
Not enough! 
Punto/Clio GTT
may look better with the red cage
The red works well imo
E36 328
I have some avo ones that only have 100 miles or so on since being refurbed. But...they're on my white Volvo project. And I'm not splitting......hint hint ;-)
Car looks amazing!
car
Why didnt you refit the rally car bumper you bought?
94' Valver F4R'd
Loved reading every minute of this!! Epic build, you must be growing money on trees or something though?! Love my MK1 Ph3 Clio, only 1.4 but will deffinatly get a Valver or Williams one day!
Will contiune to read this, keep at it. Amazing.
Will contiune to read this, keep at it. Amazing.
Nafoff
ClioSport Club Member
found somewhere then mate
Evo 5 RS
that looks fantastic
