Track / Race 172

Adam G · Jun 24, 2016

sonny172cup said:
Didnt realise they do medicals!?

They did when I did mine at least. Made it easy getting it all sorted in one.

Tony Hunter · Jun 24, 2016

sonny172cup said:
Didnt realise they do medicals!?

Not all of them do, you'd need to check beforehand to see if they have a medical facility on that day.

My Doctor is £60, it's a standard NHS charge, it's all written down.

Anything above that, is a rip off.

sonny172cup · Jun 25, 2016

Hmm interesting... Surprise surprise there...

Russ Rallye · Jun 26, 2016

Yeah think I paid £60 with my doctor and thought I'd been robbed, that was 10 years ago mind.
Russ

Adam G · Jun 26, 2016

Russ Rallye said:
Yeah think I paid £60 with my doctor and thought I'd been robbed, that was 10 years ago mind.
Russ

I've only got another year until I have to go annually.

@Josh · Jun 26, 2016

I am back from holiday on Tueaday so will ring MSV and see if they can do it on the day!

@Josh · Jun 28, 2016

So the car is going to a local race car specialist (literally 1 mile away from my house) he deals with chevron race cars and builds a lot from chassi up he also looks after 2 seats which race in 24h endurance series. He has offered to support me with fitting cage, seating position, wiring loom, fire extinguisher fitment and so on. Cant wait to get it started.

Got a few bits ready to sort out myself, a quick paint over on the inside with some hammerite paint...fit a roof scoop. Hopefully will be ready soon!

@NorthloopCup have you got any pictures of how your cage fits behind your dash?

Josh

NorthloopCup · Jun 28, 2016

[USER=11407]@Josh[/USER] said:
So the car is going to a local race car specialist (literally 1 mile away from my house) he deals with chevron race cars and builds a lot from chassi up he also looks after 2 seats which race in 24h endurance series. He has offered to support me with fitting cage, seating position, wiring loom, fire extinguisher fitment and so on. Cant wait to get it started.

Got a few bits ready to sort out myself, a quick paint over on the inside with some hammerite paint...fit a roof scoop. Hopefully will be ready soon!

@NorthloopCup have you got any pictures of how your cage fits behind your dash?

Josh

This is about as good as it gets mate, as I don't have that many pics of it in that stage.

You'll have to cut the ends off the end of the dash support mate to get the tubes in.

@Josh · Jul 4, 2016

Car went into the garage today to start fitting bits and bobs!
Received the cage and it looks.....confusing!! Has some good advice from people who have this cage so will attempt to get some pictures along the way.
Josh

NorthloopCup · Jul 6, 2016

[USER=11407]@Josh[/USER] said:
Car went into the garage today to start fitting bits and bobs!
Received the cage and it looks.....confusing!! Has some good advice from people who have this cage so will attempt to get some pictures along the way.
Josh

Did they send you a cd with a load of pictures on for how it goes together mate?

@Josh · Jul 6, 2016

I plan to, it's currently with the guy who is fitting a few other bits for me however he is an older guy and not sure if he has the time to do it....so i am prepared to give it a go with a friend who does welding for a living!
@NorthloopCup

@Josh · Jul 8, 2016

Past the ARDS test today hung around at Oulton park abit met a lad who I have seen before cannot remember his name though (Silver 172 having alternator problems)
Been up to see the Clio today hopefuly getting started this week.

Russ Rallye · Jul 9, 2016

Well done mate.
What cage did you go fit in the end? Is it a Custom Cages Clubman or something?
Russ

@Josh · Jul 9, 2016

Russ Rallye said:
Well done mate.
What cage did you go fit in the end? Is it a Custom Cages Clubman or something?
Russ

Yeah that's the one Custom Cages Clubman. Comes in a fair few bits and a DVD and images to fix it.
Not sure if you know it says you have to send a test piece off can anyone confirm this?

Russ Rallye · Jul 9, 2016

Yeah if you want certification for the cage you need to send a test weld sample. Used to come with 3 scrap bits of tube to weld together and send off and they send you a certificate back. Bit of a joke really as I've seen some of CC's welding and it's not great
Russ

@Josh · Jul 9, 2016

Russ Rallye said:
Yeah if you want certification for the cage you need to send a test weld sample. Used to come with 3 scrap bits of tube to weld together and send off and they send you a certificate back. Bit of a joke really as I've seen some of CC's welding and it's not great
Russ

Silly question do I need that certificate to meet MSA standard for racing?

Russ Rallye · Jul 9, 2016

[USER=11407]@Josh[/USER] said:
Silly question do I need that certificate to meet MSA standard for racing?

No don't need it.
Russ

@Josh · Jul 12, 2016

Got mugged off for a medical today at my GP! £101 they charged me absolutely nothing I could do as they had signed and stamped my form I was not happy considering I though it was going to be around £70....never mind lesson learnt.
Will get some pictures of the car at the weekend, hopefully will have cage half fitted by then.

Adam G · Jul 12, 2016

As Russ says Josh, no need for MSA events.

Tony Hunter · Jul 12, 2016

£100!!!

@Josh · Jul 12, 2016

Tony Hunter said:
£100!!!

The less said the better...I made a fuss in when I came to pay and she referred me to a prices chart...I was not impressed. I was only there around 10 minutes tops!

@Josh · Jul 12, 2016

Adam G said:
As Russ says Josh, no need for MSA events.

Have you sent off a sample yourself?

Adam G · Jul 12, 2016

[USER=11407]@Josh[/USER] said:
Have you sent off a sample yourself?

No, the plaque is spot welded to the a post section so a scrutineer can tell what cage it is.
The sample never got done, as I can't see me doing any foreign events so don't need it to that spec.

Tony Hunter · Jul 13, 2016

[USER=11407]@Josh[/USER] said:
The less said the better...I made a fuss in when I came to pay and she referred me to a prices chart...I was not impressed. I was only there around 10 minutes tops!

10 mins.
Blood pressure
Urine test
Eyesight test
Colour chart
????

Adam G · Jul 13, 2016

I think there's an HGV medical test that GPs try to mug you into, instead of actually looking into what is required.

@Josh · Jul 13, 2016

That's it @Tony Hunter.....Don't forget all them boxes you have to tick though haha

@Josh · Jul 13, 2016

Adam G said:
I think there's an HGV medical test that GPs try to mug you into, instead of actually looking into what is required.

I had a quick look over the chart she gave me and HGV was also on there it had a list of around 20 'Medicals' I didn't get chance to look at them all

JP83 · Jul 13, 2016

Russ Rallye said:
Yeah if you want certification for the cage you need to send a test weld sample. Used to come with 3 scrap bits of tube to weld together and send off and they send you a certificate back. Bit of a joke really as I've seen some of CC's welding and it's not great
Russ

Also chase them up when you send it Josh. They lost the original tube that my welder sent back to them! Had to use a replacement and re-send it.

Tony Hunter · Jul 13, 2016

Adam G said:
I think there's an HGV medical test that GPs try to mug you into, instead of actually looking into what is required.

I've said before, it should be about £60, they try and charge for the ECG one, which is obviously dearer.

@Josh · Jul 16, 2016

Update
Went to the car today to clear the dash out and take the boot off to make it easier for welding.
I never want to remove the dash again never mind fit it back in It's a pin to remove.
If you have removed your dash can you send me pictures of what they look like now so I can get an idea of what to put back and what I can get rid off.
Few pictures....

Mash. · Jul 16, 2016

As you've probs seen by now

Sent from my SM-G935F using Tapatalk

@Josh · Aug 2, 2016

Update 2/8
Been up to the Clio tonight, huge amount of progress which is good news! Cage is all fitted now apart from the harness bar so I lined up my seating position so the brackets can be made and fitted tomorrow along with the harness bar.
All messy bits like dash and wiring are being sorted at the weekend so hopefully in the next 2 weeks I can get a run out somewhere to make sure it is all okay and get it all set up nicely.

First race at Cadwell 3rd Septemeber in the Tricolore production plus I cannot wait I am sure it will be an experience.
Josh

imprezaworks · Aug 2, 2016

Great news josh. Look forward to how you get on

Tony Hunter · Aug 2, 2016

Bring it on.

@Josh · Aug 2, 2016

imprezaworks said:
Great news josh. Look forward to how you get on :smile:

This season is more of a tester just to get the feel for it, fair bit to do yet to the car to get it where I want!

Tony Hunter said:
Bring it on. :smile:

Along way of you get Tony haha will see how it runs in production plus

@Josh · Aug 4, 2016

Few pictures of the Clio tonight now I have been down!
Got the top dash fitted in and trimmed the bottom dash down to the middle piece only as I am still running the heater.

I need to send my seat back as it is twisted would you believe! I will speak to JJC tomorrow and see what they say.

Needs a nice tidy up but progress is progress.

@Josh · Aug 4, 2016

However not as nice as some of the other cars in the garage....

seanconnolly · Aug 4, 2016

Made a really nice job of that mate

Tony Hunter · Aug 7, 2016

Hurry up!

@Josh · Aug 7, 2016

Tony Hunter said:
Hurry up!

Just attempting to sort out some of the look then it should be sorted! Booked onto Cadwell anyway!

Track / Race 172

South Central-Oxfordshire

Attachments

Attachments

Attachments

Similar threads