Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Right guys I've got the car back together but I seem to have extra caster on one side? I haven't driven it on the road yet but I feel it will be an issue and I don't want it to catch the bumper,
The whole front end has been to bits so what do you guys think is wrong?
Can't just be alignment...
Right!! I've heard a few rumours that the rs2 inlet won't work with boost but I can't see why? Only thing I feel the problems would be is keeping the sensors in and that can't be hard to overcome?
Has anyone ever tried it?
I like the idea of it to be honest and want to see if anyone has any...
http://www.ebay.co.uk/itm/230964452366?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_687wt_1149
I've been searching for paddle clutches and this came up but I've never heard of anyone using them on Clio's before, has any of the turbo/SC guys ran these?
What's the pedal feel like etc...
Right guys, hoping i can get this off work but we'll see, either way i'll organise the convoy...
We'll meet at the friendly farmer in newark NG24 2NY
Meeting time 8.00
Leaving time 8.30
So whos coming?
1. Batesey
Saw a black 182 with a girl driving it between branston and metheringham at about 2pm
Then saw a silver 172 on the way to saxilby at about 3.20pm
Anyone off here? both looked tidy
Right guys, ive searched high and low for decent pictures to work out what hoses i need to buy for a turbo induction kit, im keeping my ITG filter with a 70mm head but i would like to run it under the heater matrix pipes and a 45 up infront of the PS reservoir, i know chip and dan has somthing...
Right guys, bit of advice needed :)
What injector clips do you all use when running meggy injectors on your clio rail?
Scoff at efi has said the standard 172 ones dont fit right , do you just use 225 clips or others with it going into the clio rail,
Do you have part numbers so i can get a...
Right guys, over the last few days with the cold weather the cup isnt starting untill the second time i turn it over, i have a odyssey 25 under my passenger seat so just wondering if its that and the cold weather, it starts perfectly if its been running in the last few hours,
Also the trip...
Right guys,
I recently bought a turbo kit but it came with what i was told 440cc injectors, they look like the ktec ones which they say are 480cc? only other thing i can think of is that they are from a megane, i know the newer 'blue tag' ones but did they ever make 'yellow tag ones'? only...
http://www.ebay.co.uk/itm/CLIO-172-182-BIKE-CARB-THROTTLE-BODY-INLET-MANIFOLD-KIT-/261068390598?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3cc8e380c6
I'm sure i read somewhere these wouldn't work on these cars? anyone else wana share any info they have
The arctic i spotted heading towards branston, then a minute after a 172cup going up canwick hill, we looked at each other but i didnt recognize him??? anyone???
First a phase 1 in black on turini's at the bank on newark road....
Then at the top of canwick hill a 172 cup on dark coloured wheels
Anyone from here i was in my dads car :(
Right guys, its not long now so its time i sorted out a convoy as per the other thread...
Meeting place: Friendly farmer restaurant pub off the A46 between lincoln and newark
Time: 5:45am We will be leaving at 6.10am
Any question please feel free to PM me and i'll try answer you questions :)...
Right over the next few months i plan on fitting a pure motorsport lightened pully/ aircon removal kit, my question is can i keep the dash buttons or do i need the controls from a cup? (with no aircon) or will the basic heater/blowers work from my climate control dash setup?
http://www.jenveytest.co.uk/home/turbo-plenum/jenvey-dynamics/turbo-plenum-sm-70mm-inlet-apsc-70
How would one of these fair on a naturally aspirated F4R? similar to a RS2? im thinking bolting the standard TB to it and run off standard ecu.. would this be possible obviously with a map
Any...
Right its time to get another meet sorted after the last one was a success! hopefully it will be warmer this time :)
Pride of lincoln pub
Sunday 6th May 2012
1pm
Any questions / Ideas?
1. Batesey
ght today ive been pulling my hair out getting in my new bucket seat, but ive got it in and now have nowhere i can mount my willians harness to? the rears ive done to the same point (for now) but where do i mount the side ones too? their isnt anywhere from what i can see :/
Any help would be...
Right ive removed my rear seats today but i cant work out if theirs a way of getting the belts through the hole in the plastics without chopping them? do you have to bend the metal bit or is their another way without damaging them?
Any help would be great as i dont wana leave them in as its MOT...
I asked my mate to try take a few pictures of my engine bay for me...
And one from my camera whilst at it...
He's got some more but thats all hes got round to editing yet
I was in a company car at work and saw these two:
The 172 cup looked nice , a girl was driving it?
And the silver 172 or 182 a girl also was driving just heading towards pelham bridge
Any one from here?
Right the last few weeks ive noticed my heaters not working very well, they arnt blowing at all, only slight heat comes out the windowscreen vents but thats about it, i've had a search but not really found much, what things do i need to check? any ideas?
Thanks in advance
Simon
Ive just bought a new rstuner, looking at the different maps i can only find 3 , 1 for v6 and two for 172/182 , am i not looking in the right place or is this all their is? this isnt a problem but didnt know if their was more to download?
Also how exactly do i buy a map? just pay for it and...
Right ive searched but to no avail on what i really want... ive bought an aftermarket steering wheel, the centre horn piece has a + lug to connect to but their isnt an earth on it? any ideas on how to wire it all up correctly as i dont want no fires :rasp:
Thanks
Right today i got up early and took a drive out to Custom technik exhausts in grantham, the plan was to get a decat made that could be swapped back quickly for the MOT, i talked with Chris via email quite abit whilst we worked out which was the best way, I'll let the pictures do the...