bearing

Alreet. I fitted my coilovers myself but forgot how they went on. The bearings have gone in the top mounts. Can anyone tell me if I'm going to have to compress The spring? I seem to remember all I have to do is tak the top nut off drop the coilover down then remove top mount with bearing. This...

Anyone able to help i need to find out the dimensions of my front wheel bearing an i was wondering if anyone on here knows what they are it a 03 clio cup 172 cheers for looking

hey, im new to this so any advice would be appreciated :) i've jus in herited a 51 plate 1.2 clio but the rear o/s bearing is rather noisy lol i know how to change it jus wanted to know whats the torque setting for it? thanks C4LLOS

I need to change my nearside wheelbearing as it's on it's way out but have been quoted £150 to sort it out and don't fancy paying that much at all! I've searched and have got a rough idea how to do it but the thing is I don't have a press to get the new bearing back in? Is there a way around...

Hey ppl, Right, before Christmas, i took my car to the garage with a knocking noise. I assumed it was a cv joint. But they weren’t convinced. They then took it too a Renault specialist and the said it was sum bearing in/on the diff. And said they were known for it. Soooo, i had the job...

Evening CS, Its become pretty apparent that the upper auxiliary belt idler pulley's bearing has retired itself from service, and is consequently sounding horrid. Its a K4J 1.4 16v engine. Could anyone possibly shed some light with regards to a part number, recognised description, or...

Hi mates. I noticed that my ph2 172's aux tensioner (the one with the big spring, PITA to change) is bent towards the back of the engine, but not enough to rub against the aux belt yet. Just last month I took the car to a specialist to get the cambelt done, and noticed the bent tensioner a...

At the risk of sounding stupid, could anyone tell me if this comes with a clutch release bearing..? http://www.k-tecracing.com/show_product.asp?id=2305 I've no idea what one looks like, and I've seen plenty of threads about them failing so thought I'd get it done at same time...

Howdy, After a few trackdays it seems my rear wheel bearings are getting a bit noisy. The discs are in great shape but I hear from various people that you need to buy the whole rear disc with the bearings already fitted. Now I have a press and all the tools needed to fit a bearing as I would on...

If they look like this should they be changed? No rough surfaces just the outer edge of the bearing thats slightly polished. Are these even called the "big end" ones or are these "main bearings"?

ive got a loud "whirring" or drone sort of noise coming from my rear wheel, gets higher pitch and louder as i go faster and im thinking its the wheel bearing. if it is then how much to have it fixed? if not any ideas what it could be? Thanks

hey every1 happy new year and all that! noticed my wheelbearing over the last few days non-clio its my berlingo van its started humming and quite deafning at like 45-50mph ive got money coming on friday so b getting it fixed then but had it jacked up today and i aint got an inch of...

Where is the cheapest place to get rear wheel bearing? not really up for changing the discs as they are in ok condition i've had a search but i couldnt find much. Cheers

I had both rear wheel bearings replaced by a local garage in the middle of August. A couple of weeks ago the sound returned which made me believe it was the front bearing that was going after only just having the rear ones done. I took it to a different garage as they quoted a cheaper price for...

Well after the days and weeks of not knowing what was wrong with the car I now do..... The clutch release bearing. Not only that but the garage that replaced the aux belt, didn't tighten it enough so some of the squeal was from that. I know have the car at a better garage. So how much...

I'm not shore which one has start to go or if it is both is there an easy way to tell?

I have a desperate need to replace the front wheel bearings especially on the passenger side (bloody round-a-bouts!! Does anyone have a guide for how to do this as I have had a look and can't see one. Also Dialogys doesn't seem to work on my PC :( Thanks

I have an 02 plate 172 with 68k on the clock. when depressing the clutch I can hear a noisy bearing it cannot really be heard on tickover but sounds quite loud when travelling at 50mph hovever and dipping the clutch. I figure the bearing needs replacing, however ive heard that these can be...

Guys, Since the cold snap my Cup has been left stood, so about two weeks. Its warmed up a bit here so used it to commute the last couple of days. I've noticed it has gained a squeal that gains frequency with engine revs, but stops when I depress the clutch. I'm guessing release bearing or...

Just a for info thread really for those who use the search function just picked up some oe renault rear discs for the 182 which include the bearing and abs ring all fitted, part number is 603RE0110 I got them for just less than £100 in a renault sealed box as well. bargain ps also they...

Pressing out wheel bearing out of the Carriers and the fuckin thing bent, Any ideas of were can get a resonable priced one? Anyone no anyone that does aftermarket ones...

From what ive been told this is pretty straight forward to change but would prefer to see a step by step for the rears before attempting need to know tools reqiured, any help would be grateful.

Hi, My car 172 Cup has just reached 40,000 miles and true to the word, the rear near side wheel bearing has started to make a noise. (annoying). How much should i be paying for a new bearing and does anyone know where the best place is to order the part? I might require some help when it comes...

im just after some advice for my 1999 clio 16v, the wheel bearing is going and is making a big noise in a stright line and when i tune left. but if i turn right it will go away i have looked at both sides its got no play in them just one of them hum like crazy any idea which side it could be...

After hard ecceleration I heard a loud crack/bang noise... A mile after I hear a low huming/whining noise then it gets louder and turns into a banging noise duh duh duh kind of noise gets louder when im slowing down or lifting off the gas and goes under acceleration... Makes the noise in a...

I have searched the forum and fried my brain with so many different answers so have gone for a new thread!! Where do you recommend buying a set of rear discs + Bearings for a 182? Thanks

replaced my front bearings yesterday and now at about 80 on the motorway. My steering wheel shakes. Just wondered if anyone has any ideas wat i could have done? All i can think is the tracking needs realigning? All help apreciated. Cheers

Got a new front wheel bearing the other day (thanks again Chris! :)) and was thinking of swapping it over this coming weekend. Is it a straight-forward job and would I need to get the tracking looked at again afterwards? Would a replacment bearing even affect the tracking? (goddamn n00b! :o)...

as above if anyone knows? but im having problems at finding them between 72mm & 84mm want to make sure im actualy getting the correct parts when i order it cheers

basicly. Im paying £90 with vat. For 2 front bearing kits. Just wondered if that was good. Also. Is my abs ring seperate? Or part of the hub. - (172 ph2 non cup.) I saw on ebay bearing kits with abs sensor? For 48 pound. Hope thats not what im geting if i dont need them? I heard u can get the...