What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Latest Additions *Update May 2010*



D1CKY

D1CKY

Its been a while since i posted some pics, so heres some with the latest changes.

Carbon Fibre Fog Light Covers
Carbon Fibre Bullets
Carbon Fibre Boot Handle
Carbon Fibre Diamond (Although unsure if i'll keep it as the weave is different to splitter etc)

Carbon Fibre Interior Dash, Gearknob and Steering Wheel Trims
K Tec Carbon Fibre Steering Wheel Thumbgrips (Different weave again although better than damaged thumbgrips)

Cup Racer Tow Eye
CTR Aerial
3/4 Plate
Rear Wiper Blank
EBC Rear Pads
Alloy Footrest

IMG_1205.jpg

c734d5e5.jpg

IMG_1195.jpg


b589e521.jpg

IMG_1201.jpg


IMG_1187-2.jpg


IMG_1218.jpg

IMG_1214.jpg

IMG_1229.jpg

IMG_1225.jpg


IMG_1208-1.jpg

IMG_1207.jpg

IMG_1189-2.jpg

IMG_1190.jpg


The dent in the rear 1/4 was caused by a neighbour while parked at the girlfriends house :mad:
She admitted liability and i'm awaiting her to come back from holiday so it can be repaired.

http://www.cliosport.net/forum/showthread.php?t=451563

P.s
I know i need Tyre Gel/Shine and to do the arches but it started raining :(
 
Last edited:
C

cupcakeyo

  Kona Nunu Mountain Bike
Re: A few of the latest additions..

Thats a sweet looking Iceberg.

The Carbon Boot Handle is different.
 
Tay

Tay

  Titanium Clio 182
Re: A few of the latest additions..

Looks ace with the new additions, shame about the dent :( hope you get it all sorted


Did you have to bond all the CF bits on ?
 
A

Ali

  V6, Trackhawk, GTS
Re: A few of the latest additions..

Lookin good rich!

Needs to be lower...(I usually don't say that) but it just needs to be 10mm-15mm lower.

Also crying out for a spoiler. Only bit i don't like is the thumb grips!
 
D1CKY

D1CKY

Re: A few of the latest additions..

Tay said:
Looks ace with the new additions, shame about the dent :( hope you get it all sorted


Did you have to bond all the CF bits on ?
Click to expand...

Dent will be fixed soon.
f**king over 60's :mad:

The only CF bits i had to bond on were the thumb grips and bullets

Ali said:
Lookin good rich!

Needs to be lower...(I usually don't say that) but it just needs to be 10mm-15mm lower.

Also crying out for a spoiler. Only bit i don't like is the thumb grips!
Click to expand...

I was looking at coilies but keep spending money on other things.
Lol

Also Cup Spoiler is on the cards after i get this f**king dent fixed.

I went to Specialist Cars for a quote and they were more expensive than Kinghorn they wanted £900+ and could go up they said as its just an estimate :eek:

My thumbgrips were knackered and they were cheaper than a new or 2nd hand wheel so i gave them a go but i'm unconvinced on the too :S
But hey there on now




172Ben said:
It does look amazing ;)
Click to expand...

Cheers mate
 
Ben

Ben

ClioSport Club Member
Re: A few of the latest additions..

Looks stunning that. Really like the changes.
 
couzens

couzens

  Petrol Blue 182.
Re: A few of the latest additions..

you got the original steering wheel insert by anychance??
 
D1CKY

D1CKY

Re: A few of the latest additions..

bensambrook said:
Looks stunning that. Really like the changes.
Click to expand...

:approve:

Matt Wills said:
Nice car but typical CS mods

:(
Click to expand...

:eek:

couzens said:
you got the original steering wheel insert by anychance??
Click to expand...

Yeah still got them but theres slight damage to them.
I'll get pics up tomorrow mate ;)

mikey123 said:
Sell me that car!!! (minus the dent)
Click to expand...

Sorry bud.

I'm planning on geting dent fixed and keeping it. ;)
 
couzens

couzens

  Petrol Blue 182.
Re: A few of the latest additions..

intrested in selling the original mate? im missing it out of my wheel
 
D1CKY

D1CKY

Re: A few of the latest additions..

couzens said:
intrested in selling the original mate? im missing it out of my wheel
Click to expand...


I can't remember what state the original thumbgrips i removed are in.

I think theres slight marks from someone pressing on the right one with there fingernail (see below) and the left one is scored.

Thats why i got new ones as i'm a fussy f**ker.

I'll get pics up of the left one as soon as i can ;)

IMG_1180.gif


IMG_1178.jpg
 
couzens

couzens

  Petrol Blue 182.
Re: A few of the latest additions..

nooooooo, steering wheel insert, at the bottom of the wheel mate, it did throw me abit when you said "them" lol
 
p@blo

p@blo

ClioSport Club Member
  Clio/A3
Re: A few of the latest additions..

Ali said:
Lookin good rich!

Needs to be lower...(I usually don't say that) but it just needs to be 10mm-15mm lower.

Also crying out for a spoiler. Only bit i don't like is the thumb grips!
Click to expand...

Second Ali's comments. This is sprung std right? Sportlines would finish the stance nicely. Either the SC c/f cup spoiler or a trophy spoiler would surely be a worthy addition?

Loving the boot trim, am looking to have a go at knocking one of these up for mine.
 
D1CKY

D1CKY

Re: A few of the latest additions..

p@blo said:
Second Ali's comments. This is sprung std right? Sportlines would finish the stance nicely. Either the SC c/f cup spoiler or a trophy spoiler would surely be a worthy addition?

Loving the boot trim, am looking to have a go at knocking one of these up for mine.
Click to expand...


Afarid its already on Sportlines, its maybe just the way i took the pics :dapprove:

Spoiler will be coming soon.


IMG_1273.gif


IMG_1275.gif

IMG_1267.gif

IMG_1269.jpg


Justin said:
Looking good! Not too keen on the back boot bit though
Click to expand...

:S
 
D1CKY

D1CKY

Re: A few of the latest additions..

More pics on the way showing the differences between the standard inlets i removed and the Jamsport Matched ones i fitted in there place with PTFE Gaskets.
I'd heard the standard inlets had shocking quality,but never realised how unmatched they were :(

Jamsport Matched Inlets

IMG_0643.jpg


I painted them before fitting the Jamsport ones.

DSC00287.jpg



Inlet Holes have shocking casting/machining on the lower inlet/engine side

Standard Inlet is on top

IMG_0758.jpg


IMG_0754.jpg

IMG_0755.jpg

IMG_0756.jpg

IMG_0757.jpg


The Plenum end of lower inlet
Rocker Cover paint job need attention.
IMG_0746.gif

IMG_0745.jpg


IMG_0743.jpg

IMG_0750.jpg


Sound deadening was removed to replace clutch cable at time of coolant change


Finished

IMG_1264.jpg



I'm just awaiting a replacement PTFE Gasket to come from Jamsport as it was damaged during postage (as can be seen in first pic)
So at the moment i have a standard Gasket between the plenum and lower inlet :(
 
Last edited:
A

Ash87

  LY R26
Re: A few of the latest additions..

i like the carbon interior bits, not a fan of that boot handle or tow eye tho
 
Davis

Davis

  Audi TT 3.2
Re: A few of the latest additions..

you deffently got the carbon bug!
does look really smart!
 
p@blo

p@blo

ClioSport Club Member
  Clio/A3
Re: A few of the latest additions..

Weird, looked a little higher than mine. Maybe with it being silver on silver. Even so, still looks v.tidy fella :cool:
 
Daz.

Daz.

ClioSport Club Member
  Clio 200 RS EDC
Re: A few of the latest additions..

Ali said:
Only bit i don't like is the thumb grips!
Click to expand...

They look fine when they're on their own in a standard interior - I think with the rest of the carbon they look a bit too much
 
D1CKY

D1CKY

Re: A few of the latest additions..

theycallmepaul said:
At least carbon is a healthy addiction....bar the bank balance

Car looks awesome :)
Click to expand...

Tell me about it, i must have spent over a few hundred on all that Carbon Bits.


davis88 said:
you deffently got the carbon bug!
does look really smart!
Click to expand...

:D

p@blo said:
Weird, looked a little higher than mine. Maybe with it being silver on silver. Even so, still looks v.tidy fella :cool:
Click to expand...

Cheers mate, and yeah it is strange regarding the ride height. :eek:

Here's some more on the Turinis.

IMG_0627.jpg

1101600957a10952940350l.jpg


And a few pics of my car at an Aberdeen Cs Meet on the same suspension (Eibach Sportlines) that its sitting on now.
The only difference is the standard wheels and horrid mudflaps.

Guess its all to do with the photographer.

dicki-1.jpg

dicki3-1.gif

Dicki2.jpg

All.jpg



peejay182 said:
Silver and carbon are meant for each other. Looks good mate.
Click to expand...

Cheers

iyrix said:
Looks very smart... Need to do something like that. :)
Click to expand...

Go for it

Daz. said:
They look fine when they're on their own in a standard interior - I think with the rest of the carbon they look a bit too much
Click to expand...

I'm a bit unconvinced about the thumbgrips but there bonded on now so its too late.

Lol :rasp:

And they look better than picked and damaged standard ones
 
Last edited:
D1CKY

D1CKY

Re: A few of the latest additions..

I forgot to add these pics for those that wandered what the differences are in the matched inlets ports compared to the standard 1*2 inlets i removed are.


Engine Block side of Lower Inlets

IMG_0760.jpg


Plenum side of Lower Inlets

IMG_0762.jpg
 
You must log in or register to reply here.

Similar threads

sevenfourate
sevenfourate's OEM+ RB200........
Replies
7
Views
2K
cpaterson76
cpaterson76
bill
Mini Cooper s
4 5 6
Replies
232
Views
21K
bill
bill
Mash.
Clioless - E46 M3 Racecar
2
Replies
65
Views
11K
Mash.
Mash.
sparklesTHEpony
Joes BG182 Money Pit..
3 4 5
Replies
169
Views
21K
Grier
Grier
I
172 Track Car
Replies
15
Views
1K
icebergclio172
I


Top