The Fatty's KTEC alternative induction setup that works just as well!

[imprezaworks]

Seems like a good deal to me

 

[mitch1503]

Universal one is only £20 though...
http://www.ebay.co.uk/itm/RAMAIR-IN...m-80mm-90mm-HAND-MADE-IN-THE-UK-/350687872196

Tbf i'm looking at getting this one (just need to check i have clearance)

 

[imprezaworks]

It's the dearer when you do it that way.

 

[mitch1503]

Also to add loggyboy the one you posted can be had for £17.50 direct from Ramair

 

[subarufreak]

I have the jms induction kit although with the standard airbox instead of the v6

would love this, just for the sound alone. just wondering where I can get the parts now? seeing that the topic is a bit old. have the 90 degree bend from sfs so just the piping and filter? who makes the battery cover with airfilter airbox?

 

[imprezaworks]

@MarcR™ ref the covers if he has any left

The pipes you can still buy. Very straight forward tbh

 

[MarcB]

I have the jms induction kit although with the standard airbox instead of the v6

would love this, just for the sound alone. just wondering where I can get the parts now? seeing that the topic is a bit old. have the 90 degree bend from sfs so just the piping and filter? who makes the battery cover with airfilter airbox?

@MarcR™ ref the covers if he has any left
The pipes you can still buy. Very straight forward tbh

http://www.cliosport.net/threads/battery-induction-cover-gb2.801753/

 

[loggyboy]

Saves nothing if you buy the metal 90 elbow as per the true 'fatty' original. And if your using mutiple silcones its never gonna be the cheapest way.

 

[mitch1503]

Im personally going for silicone piping anyways, just showing other options for filter's depending which route you go down.. Ramair website it's self is the cheapest place ATM to get the filter as they have discount codes available

 

[imprezaworks]

Or just ring them, really helpful

 

[mitch1503]

Or just ring them, really helpful

I have infact sent a email asking if they sell the filter spec similar to K-tec as iv just been out and measured my bay and even with the Medium Filter with the built in pipe looks to be a tight squeeze in the bay

 

[imprezaworks]

They do sell the filter that's similar, metal based as apposed the rubber.

Ring and ask to speak to Ryan, he should help.

 

[loggyboy]

Also to add loggyboy the one you posted can be had for £17.50 direct from Ramair

Bargain while the sale is on!

 

[mitch1503]

Bargain while the sale is on!

Every little saving is better than nowt, that's what it's all about when doing this over buting the K-tec

 

[subarufreak]

http://www.cliosport.net/threads/battery-induction-cover-gb2.801753/

I can not open the link. I'm not a member anymore...

 

[mikel_spain]

Hi there!

I am looking for this induction kit instead of ktec's. I read the whole thread but I feel a little bit lost because almost everyone needs only one or two parts of the kit. I need all of the parts, but some links are obsolete. I have the standard Airbox with filter.
Could somebody, please, post updated links for the whole kit? I need to buy it on Ebay or any shop that ships to Spain. I would really appreciate your help.

Thanks!
PS. Sorry for my English!

 

[loggyboy]

Ramair direct link - discounted direct from manufacturer for limited time (choose 70mm option):
http://www.ramair-filters.co.uk/sho...duction-cone-foam-air-filter-for-custom-kits/
Or ebay, http://www.ebay.co.uk/itm/RAMAIR-IN...m-80mm-90mm-HAND-MADE-IN-THE-UK-/350687872196

70mm pipe with swaged ends:
http://www.ebay.co.uk/itm/90-Degree-Alloy-Elbow-Bend-Metal-Pipe-Swaged-Polished-/200967481273

70m pipe with colour options (I used these, will require cutting down)
http://www.ebay.co.uk/itm/76mm-3-Al...ler-Boost-Intake-Pipe-Clearance-/251865819348
or
http://www.ebay.co.uk/itm/Red-Alumi...ZES-Intercooler-Induction-Boost-/351017954802

 

[mikel_spain]

Ramair direct link - discounted direct from manufacturer for limited time (choose 70mm option):
http://www.ramair-filters.co.uk/sho...duction-cone-foam-air-filter-for-custom-kits/
Or ebay, http://www.ebay.co.uk/itm/RAMAIR-IN...m-80mm-90mm-HAND-MADE-IN-THE-UK-/350687872196

70mm pipe with swaged ends:
http://www.ebay.co.uk/itm/90-Degree-Alloy-Elbow-Bend-Metal-Pipe-Swaged-Polished-/200967481273

70m pipe with colour options (I used these, will require cutting down)
http://www.ebay.co.uk/itm/76mm-3-Al...ler-Boost-Intake-Pipe-Clearance-/251865819348
or
http://www.ebay.co.uk/itm/Red-Alumi...ZES-Intercooler-Induction-Boost-/351017954802

thank you man!
I will purchase these two items, as it looks the best ready-to-mount combination, is it ok?
http://www.ebay.co.uk/itm/RAMAIR-IN...m-80mm-90mm-HAND-MADE-IN-THE-UK-/350687872196 70mm
http://www.ebay.co.uk/itm/90-Degree-Alloy-Elbow-Bend-Metal-Pipe-Swaged-Polished-/200967481273 70mm and 150mm length.

 

[loggyboy]

thank you man!
I will purchase these two items, as it looks the best ready-to-mount combination, is it ok?
http://www.ebay.co.uk/itm/RAMAIR-IN...m-80mm-90mm-HAND-MADE-IN-THE-UK-/350687872196 70mm
http://www.ebay.co.uk/itm/90-Degree-Alloy-Elbow-Bend-Metal-Pipe-Swaged-Polished-/200967481273 70mm and 150mm length.

In principle, yes, but I havent personally used that elbow, so not sure if it would need to be cut down but I suspect it would not.

 

[subarufreak]

bought the same Mikel
hope it will fit. been looking at this tread for a while now... finally decided on buying, hopefully without regrets...

 

[OssPoop]

I'm sure that's the one i bought, fits perfect.

 

[mikel_spain]

In principle, yes, but I havent personally used that elbow, so not sure if it would need to be cut down but I suspect it would not.

bought the same Mikel
hope it will fit. been looking at this tread for a while now... finally decided on buying, hopefully without regrets...

I'm sure that's the one i bought, fits perfect.

ok!
Thanks for the quick reply :car::up:

 

[mikel_spain]

Out of stock
I am looking for another seller to purchase this same item.
I am thinking of buying the coloured one. Is it easy to cut down? What do I need for that?

 

[loggyboy]

I am thinking of buying the coloured one. Is it easy to cut down? What do I need for that?

I used an angle grinder with a 1mm disc, however it's only thin metal so a hacksaw would easily cut through it.

 

[leeds2592]

Seeing as though I've got my name down for the battery cover group buy, thought I'd better get thinking about buying the fatty induction stuff.

Thinking of going for the full silicone jobby like @Dr Jekyll

Cheapest I found is these http://www.ebay.co.uk/itm/70mm-Blac...em4d384cc06f:g:XMkAAOSwVL1V-dt0#ht_1043wt_959

So I'll need 2 of them, 2 joiners (one to attached the pipes together and the other for the filter), the filter obvs and filter and pipe for the IVC. That's everything?

Because I'm using 2 silicone hoses, I've seen people that don't use jubilee clips on the joiner. Are the jubilee clips actually needed? If so think I'll opt for some Black ones.

 

[loggyboy]

Deleted as i misread.

 

[Karlos182]

Finally got on board with this and ordered the Ramair filter and polished pipe last night. Looking forward to getting it all fitted.

 

[James H]

@leeds2592
I used jubilee clips as the pipe doesn't seem super tight on the joiner. Better safe than sorry I thought

 

[leeds2592]

@leeds2592
I used jubilee clips as the pipe doesn't seem super tight on the joiner. Better safe than sorry I thought

Yeh I'll probably go that way too.

 

[Jekyll]

@leeds2592

I used this filter. Means then you only need one joiner and this has a neck to go straight into the silicone pipe.

 

[leeds2592]

Noice.

I'll get the stuff ordered when I get paid as I'm poor right now.

 

[JB21]

Has anyone used a cotton type filter for this set-up? I've got the Ramair foam type ATM minute but needs replacing and cotton ones are cheaper.

 

[Jekyll]

@leeds2592

Sorry for the late reply, I only see the tag when I replied earlier.

I'll dig out the link when I get a mo as i believe there are 2 sizes with this filter. I think it's 135mm.

 

[Jekyll]

http://www.ebay.co.uk/itm/271763944731

 

[leeds2592]

@leeds2592

Sorry for the late reply, I only see the tag when I replied earlier.

I'll dig out the link when I get a mo as i believe there are 2 sizes with this filter. I think it's 135mm.

No worries mate and there's no rush either, as I say it'll be next months purchase for me.

 

[20vKarlos]

Hi guys, I've been through the last 15 pages and not seen anyone using a K&N Air Filter.

I've always liked the way they sound, but is there a reason why people aren't using them?

 

[JB21]

Hi guys, I've been through the last 15 pages and not seen anyone using a K&N Air Filter.

I've always liked the way they sound, but is there a reason why people aren't using them?

Asked that above. I'm just gonna get a cheapo cotton filter from EBay (below) and see if there's any real world difference in performance, I'll let you know...
http://www.ebay.co.uk/itm/Universal...318589?hash=item235daaa03d:g:IwUAAOSwxN5WVd7T

 

[20vKarlos]

Asked that above. I'm just gonna get a cheapo cotton filter from EBay (below) and see if there's any real world difference in performance, I'll let you know...
http://www.ebay.co.uk/itm/Universal...318589?hash=item235daaa03d:g:IwUAAOSwxN5WVd7T

Maybe its just me, but that filter looks quite restrictive.

 

[imprezaworks]

Tbh even though I don't think the filter makes a huge difference, timing is key.

 

[JB21]

Maybe its just me, but that filter looks quite restrictive.

HAHAHA how did you come to that conclusion? In the past I've used cotton (K&N, Jetex, universal), foam (ITG & Pipercross) & dry-flow (AEM fibrous type material) and all do a similar job in reality, some will filter a tad better, others will flow a tad more, and they all sound a little different too. From what I've read you want a filter with a decent surface area to suck as much air as possible, especially with an N/A engine.