Thanks mate, planning to get out on the grid next season I reckon!
Sent from my SM-G935F using Tapatalk
ClioSport.net
Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Sent from my SM-G935F using Tapatalk
Clio 172 & BMW 335D
Or the end of this season....
Not much to report really, took the car for a spin last night after picking up my wheels from powder coaters
Ended up splitting a cv boot and nearly killing one side of rc6 pads due to a sticking calliper, very smokey indeed.
Lol they were clean...
Hey ho.
So today was spent cleaning up the mess, and removing the pistons out the callipers to see whats what.
Test fitted the oz reps aswell after having the bolt holes machined, fit perfectly and look great!
Not much updates really cars kinda there... before castle combe on the 6th I'll be corner weighting and doing the alignment again but yeah nout much else to do apart from replace cv boot/driveshaft
Sent from my SM-G935F using Tapatalk
Ended up splitting a cv boot and nearly killing one side of rc6 pads due to a sticking calliper, very smokey indeed.
Lol they were clean...
Hey ho.
So today was spent cleaning up the mess, and removing the pistons out the callipers to see whats what.
Test fitted the oz reps aswell after having the bolt holes machined, fit perfectly and look great!
Not much updates really cars kinda there... before castle combe on the 6th I'll be corner weighting and doing the alignment again but yeah nout much else to do apart from replace cv boot/driveshaft
Sent from my SM-G935F using Tapatalk
Not much to report really, took the car for a spin last night after picking up my wheels from powder coaters
Ended up splitting a cv boot and nearly killing one side of rc6 pads due to a sticking calliper, very smokey indeed.
Lol they were clean...
Hey ho.
So today was spent cleaning up the mess, and removing the pistons out the callipers to see whats what.
Test fitted the oz reps aswell after having the bolt holes machined, fit perfectly and look great!
Not much updates really cars kinda there... before castle combe on the 6th I'll be corner weighting and doing the alignment again but yeah nout much else to do apart from replace cv boot/driveshaft
Sent from my SM-G935F using Tapatalk
Ended up splitting a cv boot and nearly killing one side of rc6 pads due to a sticking calliper, very smokey indeed.
Lol they were clean...
Hey ho.
So today was spent cleaning up the mess, and removing the pistons out the callipers to see whats what.
Test fitted the oz reps aswell after having the bolt holes machined, fit perfectly and look great!
Not much updates really cars kinda there... before castle combe on the 6th I'll be corner weighting and doing the alignment again but yeah nout much else to do apart from replace cv boot/driveshaft
Sent from my SM-G935F using Tapatalk
Clio 172 & BMW 335D
Sooo getting out the end of this season??Rear tow strap fitted, just a plumbed in extinguisher to go and shes race ready... [emoji48]
Sent from my SM-G935F using Tapatalk
Financially I cant see it happening this year, as wanna try and get as much seat time as possible as im unexperienced in the schemes of things.
What Ive got left to do
- extinguisher £120
- helmets + hans £550
- race suit + gloves + boots £400
- Go racing pack £100
- Medical £60
- ARDs £250
I dont like writing it that way...
Sent from my SM-G935F using Tapatalk
What Ive got left to do
- extinguisher £120
- helmets + hans £550
- race suit + gloves + boots £400
- Go racing pack £100
- Medical £60
- ARDs £250
I dont like writing it that way...
Sent from my SM-G935F using Tapatalk
Clio 172 & BMW 335D
When you put it like that it sounds bad, I spoke to JJC and they sorted me out with a with good discount of all clothing!
Also Tony hunter told me to speak to the Tricolore guy (Steve Vince) and he sorted me out with entry fee for the end of the year
Jekyll
ClioSport Club Member
What wheels are the "reps?"
scotiamr2t
ClioSport Club Member
Mazda 2, Ph1 172
Calibre suzuka I think @Dr Jekyll
Haha yeah not good hey! But yeah gonna buy a helmet hans asap as id wear that on trackdays and go from there, ok mate will bear that in mind! Cheers
Sent from my SM-G935F using Tapatalk
Yeah about £300 and weigh less than my 1.2s, obviously annoying as they use tuner style wheel nuts, which I had machined so all wheel nuts will fit now, good looking wheel though.
Sent from my SM-G935F using Tapatalk
172 Ph1
Was it the hole diameter that was just modified to get your socket to go down ?
Thats the one mate, exactly that - although the wheel nut is exactly the same width as my socket, so wheel nut was the first problem as that wouldnt fit at all
Sent from my SM-G935F using Tapatalk
scotiamr2t
ClioSport Club Member
Mazda 2, Ph1 172
The tuner nut issue was why I opted not to buy them. Can't be arsed having them machined nor having 2 sets of wheels nuts
Jekyll
ClioSport Club Member
Are they strong Mash? I've not heard of them before but as you say, there lighter than 1.2's and they look very similar to ultralegerras amd are sub £300.
Jekyll
ClioSport Club Member
Sony out can't use normal wheel bolts/nuts?
172 Ph1
Was that , so you can't use standard Renault wheel nuts @Dr Jekyll .
I think where the wheels have now been machined , @Mash. Is able to get the standard wheel nut down onto the taper. I think now the issue is the socket is damn close in size to the width and is tight going in . "We all love a bit of tight going in"
It's seems he's happy with the results.
Jekyll
ClioSport Club Member
Haha, bloody auto correct spelling check!
But yes, that was what I meant!
But yes, that was what I meant!
172 Ph1
172 Ph1
Looks nice and secure that [emoji1303]
I need to re-position my go-pro to side cabin view . I'm running HLT on my screen front and rear .
Be good to see a live feed of this weapon on track . [emoji1303]
No streaming from me as mine are stand alone units .
RB197
Looks slick mate
Sent from my SM-G920F using Tapatalk
Sent from my SM-G920F using Tapatalk
Yeah really secure good position to! I wanted to use my rear cage obviously but it mounted the go pro at funny angles whatever mount i used!
Sent from my SM-G935F using Tapatalk
172 Ph1
Yes , it's a shame GoPro don't allow 45' deg turn or even 90' deg . Would help us track guys out a lot .
Yeah i tried searching everywhere for a ball and socket type joint but yeah nothing, maybe thats something i need to jump on and sell myself haha
Sent from my SM-G935F using Tapatalk
NorthloopCup
ClioSport Moderator
Maybe if you searched for a manfreto mount you'd have found something useful.
NorthloopCup
ClioSport Moderator
Sorry manfrotto not manfreto
Nothing really ticks the bill unless I havent looked hard enough and i found the screw type ones always come loose with vibration, I'm using one to hold my phone to the dash board to run harrys etc.
Sent from my SM-G935F using Tapatalk
Thank you mate, I dont know how much you've read but its pretty disjointed in places, winter time im hoping to drip everything back again, and send everything off to be sandblasted back, and do things properly, aswell as removing the underseal and prearing the shell betterGreat read this, really impressed
Sent from my SM-G935F using Tapatalk
Greeny.
ClioSport Club Member
440i + 182
I wish I had the space/knowledge/tools to do some more to mine, although I do love working on my track car there are lots more bits ive love to do. Biggest problem I have is I have to roll it back into the garage every time I work on it
NorthloopCup
ClioSport Moderator
I'd say you've probably not looked hard enough then tbh. Me and BIGASH use the same setup and have never had any issues with GoPro's coming loose.
Ok mate, well as you seem to have a good idea of what mount you use, could you find us a photo?
Sent from my SM-G935F using Tapatalk
I didnt have the knowledge 2 years ago mate, it was just a case of doing it, researching whats what etc.I wish I had the space/knowledge/tools to do some more to mine, although I do love working on my track car there are lots more bits ive love to do. Biggest problem I have is I have to roll it back into the garage every time I work on it
Now that sounds like a pain, yeah I dread my gravel drive but least it can stay put under the car cover everynight!
Sent from my SM-G935F using Tapatalk
172 Ph1
@Mash. I use a RAM MOUNT . It's the bollo*ks
You need to look there bud
Watch the first video
http://www.ram-mount.co.uk/1-diamet...-virb-x-virb-xe-adapter-p-1708-c-360_168.html
You need to look there bud
Watch the first video
http://www.ram-mount.co.uk/1-diamet...-virb-x-virb-xe-adapter-p-1708-c-360_168.html
nice thanks mate that looks good, is that nice and stable?
Similar threads
