ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Wonky's Not so Wonky blue oval
- Thread starter Christopher.
- Start date
Spent an hour with me (18st) my mate (14st) stood on the calliper and my old man jumping on a 10mm Allen key to get the bolts off. We got 2 of 8 !
No not yet, gonna give a breaker bar with the calliper in a vice a go tomorrow.
How will hitting it with a breaker bar help? :S
Fletch and I can give you a hand, I'll bring my chainsaw and Fletch will bring his heat gun.
Fletch and I can give you a hand, I'll bring my chainsaw and Fletch will bring his heat gun.
Fletcher
ClioSport Club Member
Seriously, if you do need any help give us a shout Chris. It's about time TAR got back into mechanics.
Fletcher
ClioSport Club Member
Its ok iv done it 
Opened a can of worms mind but iv done it. Looks there going to need a new set of seals and one of the pad guide bolts didn't want to come out so had to drill it out. All of the brackets and rebuild kit came today so may as well do the seals.
Opened a can of worms mind but iv done it. Looks there going to need a new set of seals and one of the pad guide bolts didn't want to come out so had to drill it out. All of the brackets and rebuild kit came today so may as well do the seals.
Well iv F****D the callipers 
Firstly the main problem with them is that over time dust and other such crap gets caught behind the pad guides and starts to push them outward as well as eating the metal behind. So to clean them up you need to take out the T25 headed screw, (I actually believe there made from butter) so the head rounds off. Went to remove them with a screw removal set which then snapped off in the hole I drilled So drilled it out. And this is where I really messed up. Drilled a bit to far in 3 of them to fully get them all out and in doing so drilled into the reservoirs behind the pistons. Probably the best £150 iv ever wasted. Had ordered the brackets and rebuild kit but will send them back, its a good job I held off of the seal kits. Might just paint them up too look pretty and flog them on e-bay ?
Also my dad has said I can now have his BMW 5 series if I sell the Fiesta. So more than likely now it will be up for sale the beginning of April !
Firstly the main problem with them is that over time dust and other such crap gets caught behind the pad guides and starts to push them outward as well as eating the metal behind. So to clean them up you need to take out the T25 headed screw, (I actually believe there made from butter) so the head rounds off. Went to remove them with a screw removal set which then snapped off in the hole I drilled So drilled it out. And this is where I really messed up. Drilled a bit to far in 3 of them to fully get them all out and in doing so drilled into the reservoirs behind the pistons. Probably the best £150 iv ever wasted. Had ordered the brackets and rebuild kit but will send them back, its a good job I held off of the seal kits. Might just paint them up too look pretty and flog them on e-bay ?Also my dad has said I can now have his BMW 5 series if I sell the Fiesta. So more than likely now it will be up for sale the beginning of April !
Stupid Ford design. Was out for a drive yesterday, was going pretty hard I admit so the usual was happening in the driver's footwell ! The exhaust manifold runs right next to your feet and they start to cook Then something happened that I have heard about in the ST's when driven hard. The PAS fluid started to boil 
got a flash of warning light's on the dash then the steering went solid, Pulled over popped the bonnet to be greeted with a nasty hot smell :dead:. Let it cool down and carried on back home. Thankfully doesn't seem to have caused any damage what so ever, so topped it back up and has been fine today. Oh and I lost a centre cap off the front wheel 
Now going to wait until payday and chop it in for something a bit more fun (not a Clio mind). Father needs his 5 series now so that's out of the question. Trying to drive the ST fast is quite demanding i have found out, and I find myself stepping out of the car disappointed with it. I knew it wasn't going to be as fast as the Clio but think I underestimated just how much harder it was going to be. Certainly makes you respect just how much of a good car the Clio is though.
Any suggestions on the next car then ? Got a bit of monies to play with (£2500) aswell as the Fiesta. Iam thinking a Civic Type R (wait's for the hail of abuse) or a RS Megane ?
Then something happened that I have heard about in the ST's when driven hard. The PAS fluid started to boil got a flash of warning light's on the dash then the steering went solid, Pulled over popped the bonnet to be greeted with a nasty hot smell :dead:. Let it cool down and carried on back home. Thankfully doesn't seem to have caused any damage what so ever, so topped it back up and has been fine today. Oh and I lost a centre cap off the front wheel Now going to wait until payday and chop it in for something a bit more fun (not a Clio mind). Father needs his 5 series now so that's out of the question. Trying to drive the ST fast is quite demanding i have found out, and I find myself stepping out of the car disappointed with it. I knew it wasn't going to be as fast as the Clio but think I underestimated just how much harder it was going to be. Certainly makes you respect just how much of a good car the Clio is though.
Any suggestions on the next car then ? Got a bit of monies to play with (£2500) aswell as the Fiesta. Iam thinking a Civic Type R (wait's for the hail of abuse) or a RS Megane ?
Fletcher
ClioSport Club Member
If I was in your shoes mate. I would go for either a 182 trophy, or Megane R26 + Stage 2 
welshname
ClioSport Club Member
The civic will leave you disappointed unless you go for either the anniversary or the JDM.
Unless you can pick up an EK9 for that money?
All depends on what you want from a car. As above I'd suggest you drive a few different cars and see what you think. The steering issue in the EP3 is only noticeable when driving hard really. It doesn't bother some people though, personally it isn't a massive deal for me when I've driven them but it does make it harder to drive than other cars.
Unless you can pick up an EK9 for that money?
All depends on what you want from a car. As above I'd suggest you drive a few different cars and see what you think. The steering issue in the EP3 is only noticeable when driving hard really. It doesn't bother some people though, personally it isn't a massive deal for me when I've driven them but it does make it harder to drive than other cars.
SG boost'd 200
Having just read about you PAS boil up problem, I can tell you that this is a massive fault with the St's. I work for a motorsport team, we currently run 5 fiesta's in the Dunlop St's championship. This is a common problem with which we can only help by,Using a Oil cooler rad and modifying the PAS cover cap with a pipe, down to a overflow catch tank. Hope this helps?
I agree with Fletch get a 182 Trophy, Megane, or maybe an M3.
This is a decent spec'd R26 for £7.5k and I think he's a CS member as well
http://www.meganesport.net/communit...egane-R26-44700M-Silver-Nice-upgrades-%A37500
This is a decent spec'd R26 for £7.5k and I think he's a CS member as well
http://www.meganesport.net/communit...egane-R26-44700M-Silver-Nice-upgrades-%A37500
big boost cup
Get an R26 Chris! Certainly a big step up from the 182's, wish I'd listened to Tim earlier
Only because it has a loud chav valve
Back to plan A, selling the ST (http://www.autotrader.co.uk/classif...page/3/keywords/st/postcode/po108ng?logcode=p) at an absolute bargain Having a works van for a couple of weeks then moving on to the 5 series.
Having a works van for a couple of weeks then moving on to the 5 series.
Iain C
ClioSport Club Member
3.8k crikey.. they have dropped. Id keep it
Fletcher
ClioSport Club Member
Back to plan A, selling the ST (http://www.autotrader.co.uk/classif...page/3/keywords/st/postcode/po108ng?logcode=p) at an absolute bargain
Dads old bus mate?
Nothing wrong with it what so ever, Needs a service in 2k miles but thats about it. Just want it gone.
Yes mate
If ya want. No joke
Balls you wouldn't of got rid.
Hope you're not taking too much of a hit on the ST mate. I think you should aim towards a Mk1 FRS next
Get an R26
Get an R26
Get an R26
Getting common now! Every wannabe racer has em
Rather go a bit mental on mine now ive got them new lump.
True I had started to hate the Clio before I chopped that in. Id still love a car to mess about in/with but Im 25 this year and still living at home with no money saved up to move out. As sad as it is to say for the past 4 years my life has pretty much revolved around the cars I have owned. There's more to life than a tin shell with wheels Im sure.
