Search results

I know there are 2 bolts inside scuttle to remove / install. Are there any bolts on the inside ? I'm trying to fit matrix into my white shell but it seem to sag down at the top. Has anyone got a diagram showing the fixing points or do i need to do something else as i dont have sound deadning etc

Need to fit 2 rear quarter glass to my white shell. I have 2 windows from a cup , i cant make out if the windows have a seal or it is just the original bond 🤔 Whats best to use to bond them ? Tiger seal ?

Fitted my epas column today and struggling to get it aligned with the steering hubs. Ive got the sterring wheel straight and ive attached the epas column to the epas rack but im struggling to get the wheels straight. The track rod ends are wound as much as they can go so i feel like my track...

Thinking of buying some new shocks fot the front and rear on my white shell im building as it appears to have standard 182 shocks with lowering springs . I see people fit Cup shocks , is there any difference in 172 cup and 182 shocks ? My 182 is a non cup chassis

Can anyone help with bolt sizes , length and pitch looking to reolace various pink bolts and others . Upper inlet M6 X 25MM ? Upper cambelt cover ? Engine mount and nut ? Thermostat housing all ? Upper gearbox nut and bolts and spider mount ?

My red track car has heater matrix removed so assuming i need to buy some hoses to create a u as no matrix. What have people bought and done ? Do i need to do anyb5ing elsle ?

What have people used and done ? I want to paint under the arches white. Its currently the factory silver finish , have people just directly sprayed or painted or have used a pimer then paint ? Looking for a smoothish finish

Whats the best way to get it all centered , ive got it fitted to the subframe but need to fit column then fit track rods and ends.

I have done a search for this and have found M12 x 1.5 ? Can anyone confirm this who have purchased replacement bolts ? Also what length ? I need a set to bolt in just to move a car around on drive

Anyone live here ?

Just wondering if my track car would drive without speedo clocks ? Car currently doesnt have any fitted as previous owner didnt run them and used a GPS App on phone and rev counter

Already have a project that hasnt progressed much so another shell was definitely not planned. Was looking for parts for my white shell so agreed to buy front subframe , arms and resr beam along with clutch and a pair of driveshafts. Then i got tempted on some other parts ! Had to get the...

Anyone had an this issue ? Wouldnt move left ot right . Assuming im going to have to send it off to kw for a rebuild.

Is anyone running the old style Pure motorsport aircon delete kit with Epas ? I was wondering if i can just fit a smaller belt without the hydraulic pump rather than sourcing a cup set up ? If so what belt do u need ?

I had initially bought a cup alternator and bracket set up but it got sold with the engine it turns out now. What are my options with Epas set up ? I have the old style pure motorsport air con delete brackets and standard 172 alternator ? Can this be used with the epas set up ? Do i need...

Ive just got a Sabelt wheel , looks like it could do with abit of clean up. I read about using a suede brush ? What do people recommend ? What have people used and got good results ?

Euro car parts list 2 different types for my car. Are the pics accurate ? Im not not sure how you tell apart from the top of the joints look different in the photo and mine is not same diameter all the way like pic 2. Was it a specific model which had a particular type ? Mine looks like this...

I will be carrying out a abs delete on my track car , what brake bias valve would people recommend who have done this on there track cars as i see there afew differnent options available. Thanks

Are these kits ok now ? I read there were lots of issues previously but they have been taken over now ? Looking to do abs delete since the track car has no brake lines currently. Dont have the tools or have ever attempted making my own hardlines up so thought this might be my best option

What do people use for this ? I have a track car i am building which is missing various parts ans i have some bolts but i doubt i have them all ! I have the spreadsheet for some new bolts for suspension and arms. Gearbox im not sure if i have all the bolts for this yet , then there is the...

The bonnet which has come with my track car has had all the strengthening cut away but also the hinge fixings ! I did see somebody had fitted 4 aerocatches to get around this as i would expect this would be the safest option 😂 I see you can get quick release but they could give way possibly 🤔...

How much have people been paying for subframe powder coated ?

What trackrods do i need for EPAS conversion ? Do i need to remove the ones of dci rack for some 172 / 182 ones ?

Im going to be running brembos 225 which have been shaved 5mm , what offset woukd be best as i think there are 2 offsets avialable ? Where is most competitive for price on these ?

Are the rears the same as the front in respect that there is a cage which will require removing in order to get a spanner located on top ? The fronts were a pain and i will be planning to fit locknuts when i refit

Clutch fork for 172 / 182 , is this just a standard part for any clio ? Just noticed the one which has come wirh my box is a VW one. Also need the bracket on the gearbox for.thr clutch line

Any ideas where i can get one from ?

I have 2 sets of front headlamps, one set the internals are fine but the external brackets are broken , the other set Intenal brackets are broken external brackets are ok. Can they be fully stripped down to make one good set ?

Need to fit new fuel lines from the pump to fuel rail , looks like they have been removed from the shell I have ! Anybody have the part numbers ?

Alternator is seized which came with the engine. It has a PMS aircon con delete bracket. What belt is required for this set up and assuming I just get a valeo alternator ? Undecided whether to go epas , assuming then i would need a different belt again and do people run a cup alternator then ...