Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hi,
My H reg Mk1 Phase 1 (1.2 E type engine) is now on 102K and 16 years old and it is due for another cambelt change.
I want to do this myself as it is a good learning experience and plan to do it over Christmas (that can be the cars Christmas present :-) so I have plenty of time if it goes...
Hi,
my Mk1 Ph 1 Clio is troubling me.
The nearside side light, nearside tail light and both licence plate lights are all kaput.
The bulbs & fuses are fine, there are just no volts getting to any of them.
I had a quick look at the Haynes wiring diagrams and after a lie down with a...
bout £50
front grill was broken so replaced it with mesh (£57 quid for a new one from Reno, I don't think) and the rest spent on paint doing trim changes.
Have 3 children so money goes on that
/Mad
I have just fixed the same problem on my car.
Symptom: intermittent starting either hot or cold.
I was getting a clicking sound but I later found that this was not the solenoid as it was too quiet. The solenoid on my car (Mk1 Phase 1) makes quite a considerable clunk as it shoots the gears...
Quote: Originally posted by fUbAr on 14 September 2005
ive also put some of the common engine types on my DVD for reference which makes things easier.
Thanks for the instructions.
One thing I would like to do is prepopulate the intial screen with my cars details rather than having to...
Ah, working now after the famous Windows reboot.
Fubar. I am interested in the procedure for installing to DVD. Would you be able to knock up some instructions?
thanks for your help,
/Mad
Thanks for your replies guys.
As I say, I used to have it working fine, but now it sticks at:
java.lang.NoClassDeffFoundError: quicktime/QTSession
So we know its quicktime related....! but java and classes are not my area of expertise so Im a little stuck.
Hi,
I am having problems running my copy of Dialogys on XP. It used to run fine on Win 2K, but since upgrading it wont start.
Does anyone know which version runs ok with XP as I am lost without it.
thanks,
/Mad
I think I have a spare plip lying about that you could have.
Had to butcher it as my key wouldnt fit the plip my central locking came with, so took a hacksaw to the pcb board and cut it down in size so that it fitted the other plip and all works fine.
Let me have a dig about and see if I...
Here is a scan of the Haynes manual showing the central locking wiring schematic.
I colour coded it a while ago for my own benefit, not all the wire colours are the same on the car, Renault seem to swap them about a bit.
http://img100.exs.cx/img100/5764/wiringdiag7xj.pngLink to schematic...
heh,
they were busy, were cutting keys for the house and I dropped the wifes boots off to have new zips put in.
But, yes, pretty tardy all the same :-)
/Mad
Just buy a LED holder and the right resistor and you can fit any LED, remember that LEDs are very directional so you wont get very good lighting in the boot.
I added two LEDs to the boot which come on automatically when the boot is opened, and also kept the orignal white light (with new...
Changing the bulbs is easy, just prise off the switch with a scewdriver, pull the blown bulb out and replace. Thats after spending half an hour trying to fish the wires out of the dash after they slip inside :-)
Re the switches, you would have to replace the orange filter with a different...
Its not too difficult.
I removed the:
Center console
Driver’s footrest
Lower right door trim
Driver’s carpet
Top half of dash
Front pillar trim
Upper right door trim
Sun visor
Peeled back some of the headlining
Then it was just a case of removing all the old loom and feeding it...
Try the rear lights. If they are not seated correctly a lot of water can get in. I couldnt believe the size of the puddle I had from mine. Reseated and its fine.
/Mad
The door cards have a sealant that goes round the edge. It is like a combination of superglue and bluetack. Took me over a week to remove it and the hairs from my arms. Now I wear a long sleeve top when taking panels off.
/Mad
Report him.
He is already banned for drink driving, and now dives like an idiot and skids into your mates car.
He doesnt care about your mate (or other drivers) otherwise he would:
a) Not drink & drive
b) Not drive without insurance
So why should your mate care about him?
Who is it...
As James said, it is either the control dial or the resistor in the heater blower.
Check with a multimeter that all the contacts in the dial are working (see image) The extra wires are where I added in blue LEDs and are not normal.
http://img29.exs.cx/img29/7586/heater.jpg
If these are...