Search results

hey all, i own a 1.2 8v 2000reg mk2 ph 1 clio. its in need of a new gearbox and clutch. been offered a few but i want a gearbox from a place i can trust. anyone know any? also as its a 8v will the gearbox differ from the 16v? as much info on gearbox's or part numbers will be great. thanks. sam

hey all, my little 1.2 clio has decided to break, well the gearbox has. i was planning to sell it and buy a new car however this has happened. is it worth spending the £££ to get the gearbox fixed? or do i just spend more £££ which i had saved and drop a 182 or 172 engine, gearbox etc in...

driving home from the gym and got half way home when i heard a series of loud CLACKS, thats the only word to describe it, only occurs when i put my foot on the accelerator, more revs louder clacks, then when i reached a roundabout and put my foot down on the clutch it cut out completely leaving...

hey all in a pickle need paint for my car but dont know the colour of it. can some one please help. code 713 (i think)

driving back from work in pissed off mood as charli would know anyway. hit a pot hole BAM gearstick now laying horizontal and gears work but a b**ch to change. get home find this! engine mount bolt under the car has snapped clean off. as its sunday no garages open. got work at 5am...

when driving why is it my engine cuts out then kicks back in. does it every now and then. im guessing its electrical as everything dies including radio. plz?

when im driving around town the noises are non existant however. when going down the motor way they occur and then from then on its stays until rested over night. hig pitch squeel appears to come from passenger side wheel maybe? really LOUD when window open however shuts up when clutch is...

would you expect to pay out for all this? front brake set up off a williams? 2 x discs & set of pads 2 x uprights, 1 with new wheel bearing 2 x front shocks 2 x calipers used by the way. cheers

just bout some 15s. 15x7. need tyers. what would you recomend? either of these? has anybody used them? what size. 195 50 15s? avon cr338 toyo t1-s toyo t1-r yokohama parada the new toyo proxes 4 anyone tried these?

took my alloys off as im gunna be refurbing them so i had to stick my steelies back on. 14s woo hoo lol. heres a piccy what you all think lmao. could i bring them into fashion? makes it LOW!

borrowed a m8ts 172 alloys. however despite looking pretty good they rubbed on the inside of my arches. why is this? i take it i need spacers?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AL%3ARTQ%3AUK%3A1&viewitem=&item=280071616541&rd=1 is this engine worth it? what would it take to put it in my mk2 ph1? would the power be good or a 172/182 better?

im borrowing a m8ts clio 172 alloys atm instead of my 17" and i prefer em soooo much. look better and grip loads more. so i want a set of 16" or would u go 15"? and how wide is the most i can go without arch work? 7.5? also whats the ET of my car? and the limits i can go plus or minus? Clio...

i got a 1.2 clio grande and im customising the dash. in the centre of the dash is that stupid clock. i wanna remove it and put a digital speedo init. obviously il need to custom make housing etc. this possible to put one in? what works involved how can i do it? cheers.

fit my front coilovers today and slammed it on its arse. cud only fit 4 fingers under front bumper. however i couldnt turn the wheel lol. so i had to raise it up. i loved the look of it that low. anything i can do to keep it that low without it scrubbing like mad? 15" with low profile tyers...

getting coilovers fitted but wanna get my wheels laser aligned so the tracking is sorted etc, however i went to get it done and they said i need to know what it needs to be set up as so they can configure it into the computer. i have no idea, anyone know??? im loweing it 35mm from standard...

hehe arrived in the post today. woo hoo. question is.... do i fit em today?? or.... do i wait till after crimbo when i get new alloys and put my seats in and paint the interior? also camber correcting bolts? any good? are they worth getting? cheers.

right firstly, ive got coilovers to fit shud i buy the camber correcting bolts from k-tec? will this help the camber? also... whenever i get my tracking done always seems to be out. i did have a seized track rod end so im gunna buy 2 new ones both side. n e 1 no where i can get em from and...

just bought a new set of coilovers. wanna check sumit. do i adjust em to the setting i want before or after fitting? if after fitting i guess i adjust it in the air not the floor? and if i need to adjuist at a later date do i have to clean em well first? thanks.

is it better to go wider at the back or same all round? whats the widest i can / you wud go? i was gunna get a set of 16x7.5 or 8? this ok or not? also i believe the ET of my clio is 37?? the alloys i want are ET 35. is this ok? still gunna fit etc? thanks :approve:

yes or no? whats the pros and cons? anyone got 18s? i herd it handles s**t. im after new alloys do i stay at 17s bigger or smaller? im running 17"x7 shal i go 16x7.5 or 8 if possible deep dish? cheers.

que the clio williams 1 2 and 3, the clio 172, the clio 182, the v6 and now the new 197... everytime they come out with a new almightily powerful hot hatch to blow your socks off everything seems to get a bit bigger. not anymore. the new weapon of renault is the renault twingo... yes...

right i wanna new set of rims but i dunno what. i want euro ones. deep dish. i seen some posts before and i love them. they look awsome. i was thinking of maybe some lenso vienna? what wud u lot recomend? what size? 17" etc?? what width?? 7.5 etc?? whats the widest i can go? also i want...

i have angel eyes on my clio and not even a year old and 1 ring, the biggest 1 on the drivers side has gone. the rest are all fine both sides. n e 1 no whats happened as i thought LED's dont blow. thats if it is LED. many thanks.

grrrrr. driving home today from college down a lane when a 4x4 wudnt move over i cam to pretty much stop and crawled past but still curbed my alloy not the lip but the actual face. now it looks s**t and im angry lol.:mad: so i want advice as to what steps i shud take to re-spray them. im...

Hey all. i think this is a long shot by far but can someone list the complications involved and approx cost of doing this. just been offered everything needed to perform an enginge transplant into my 1.2 8v 2000 v-reg clio. £1500 heres my engine bay: tiny engine i no lol. but..... its a...

on my mk2 2000 v-reg 1.2 8v clio whats the bolt distance centre to centre? i no there is like 3 different ones. i think mines 54mm. i did measure it it seems 54 but sometimes seemed 52mm. its definatly not 56 i dont think. these are the 3 sizes correct? also been offered som GAZ adjustable...

:star: Hey all im new to Clio Sport however i have owned my clio for over 2 years now. I'm Sam 19 From Stevenage in Hertfordshire. Drive a 1.2 8v 2000 V-reg Grande clio. haha i no its a 1.2 it is modified but to get a euro look its not OTT. :dead: Next on the agenda is deep dish alloys...