ClioSport.net
This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
-
When you purchase through links on our site, we may earn an affiliate commission. Read more here.
Disco 3 &4 1993 mini
Re: clio cup race car project!
right didnt do too much today but got a little update. id remembered id got a pair of rebuild kits for the front calipers. so i set about taking them apart
and oafter a bit of wire wheeling they looked like this
i had some paint left over so gave them a quick coat
so i set about rebuilding them
i wire wheeled the sliders put new grease and boots on
cleaned up the pistons and put new grease on and slid them back into the caliper
and the finished article
i also got some brake lines made up by Matt and Think Automotive 02085681172
he did an awesome job, really good quality.
thats all for now more next week
right didnt do too much today but got a little update. id remembered id got a pair of rebuild kits for the front calipers. so i set about taking them apart
and oafter a bit of wire wheeling they looked like this
i had some paint left over so gave them a quick coat
so i set about rebuilding them
i wire wheeled the sliders put new grease and boots on
cleaned up the pistons and put new grease on and slid them back into the caliper
and the finished article
i also got some brake lines made up by Matt and Think Automotive 02085681172
he did an awesome job, really good quality.
thats all for now more next week
Re: clio cup race car project!
I always prefer as much solid line as possible due to improved feel over lots of braided. Braided is much tougher than rubber brake hose but still has some give and over a long enough run its sufficent to feel.
The original Noble M12's were braided throughout the entire brake system and we got very good results in terms of brake feel by changing the vast majority of it for old school copper.
Cheers
M
I always prefer as much solid line as possible due to improved feel over lots of braided. Braided is much tougher than rubber brake hose but still has some give and over a long enough run its sufficent to feel.
The original Noble M12's were braided throughout the entire brake system and we got very good results in terms of brake feel by changing the vast majority of it for old school copper.
Cheers
M
Disco 3 &4 1993 mini
Re: clio cup race car project!
didnt do much today as was working but realised i had a power steering leak.
found out that there is a big crack at the top where the pipes connect so that means a i need a new steering rack hopefully supplied by the team i do some work for.
didnt do much today as was working but realised i had a power steering leak.
found out that there is a big crack at the top where the pipes connect so that means a i need a new steering rack hopefully supplied by the team i do some work for.
TrackCar & F30 330d
Re: clio cup race car project!
Oooooooo i'm so jelous. Look like a great project. cant wait to see it finished.
Oooooooo i'm so jelous. Look like a great project. cant wait to see it finished.
3.2 V6 4KEV, 944 Cab, 172
Disco 3 &4 1993 mini
Re: clio cup race car project!
If thats p**n whats it gona be like when its finished? haha
If thats p**n whats it gona be like when its finished? haha
and i thought i had the best free car on here
Disco 3 &4 1993 mini
Re: clio cup race car project!
thats roughly the ride height it will run at, theyll prob be a few adjustments when i corner weight it
thats roughly the ride height it will run at, theyll prob be a few adjustments when i corner weight it
megan R26.R number 006
Re: clio cup race car project!
thats how a clio cup car looks at the back there is not much play whith that hight eather
thats how a clio cup car looks at the back there is not much play whith that hight eather
M
mini-valver
Re: clio cup race car project!
This is something I've bveen wondering about. When I put the car on a 4 poster, the rear springs drop out. When I'm cornering hard and the back wheel lifts, is the spring going to come out??
This is something I've bveen wondering about. When I put the car on a 4 poster, the rear springs drop out. When I'm cornering hard and the back wheel lifts, is the spring going to come out??
lift number 1 @ btm
Re: clio cup race car project!
can happen!
my rears have helper springs on to stop dislocation.
can happen!
my rears have helper springs on to stop dislocation.
M
mini-valver
Re: clio cup race car project!
FFS, shitbox FK's. Aside form raising it, which I dont want to do, is there anything other than that??
FFS, shitbox FK's. Aside form raising it, which I dont want to do, is there anything other than that??
ITB'd MK1
Re: clio cup race car project!
"shouldn't" happen due to the axle design. Being that the rear isn't independent, you get both sides doing the same thing, so one side is pushed into the arch, the other will follow. you have to allow for a certain amount of flex obviously.
"shouldn't" happen due to the axle design. Being that the rear isn't independent, you get both sides doing the same thing, so one side is pushed into the arch, the other will follow. you have to allow for a certain amount of flex obviously.
Qashcow
Re: clio cup race car project!
yea got to agree with you and danny, the whole rear beam will move so the FK's springs wont fall out. i believe H&R's are he same too
and to the other person who asked, they are (at least mine are) bubble type at the rear, not straights
back on topic lol
yea got to agree with you and danny, the whole rear beam will move so the FK's springs wont fall out. i believe H&R's are he same too
and to the other person who asked, they are (at least mine are) bubble type at the rear, not straights
back on topic lol
