ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

Mondial 172 Cup OEM+ / Rolling Resto

Had the day at home today so did a bit more with the car, when I was checking it over last Sunday I spotted a little split in the outer CV boot on the passenger side.

I ordered a Febi one from partsinmotion during the week, which turned out to be as much use as tits on a fish, incorrect in every dimension.

IMG_20260717_113102.webp
IMG_20260717_113114.webp
IMG_20260717_113207.webp
IMG_20260717_113216.webp


So I resorted to a Sealey universal stretch boot from ECP which fits perfectly TBH, obviously I had to drain the 2 month old gearbox oil to fix it, I was planning on putting it back in so I caught it in a clean 3L measuring jug and strained it through a 190 micron paint filter into a new clean bucket

IMG_20260717_141410.webp


There were no bits of gearbox in the strainer which was nice, but I just couldn't put used oil back in, despite it having only done about 600 miles.

I had 2L left of the 5L bottle of Millers CRX gearbox oil so that went in instead

IMG_20260717_141414.webp


And I've ordered another litre bottle which should be here Monday/Tuesday so I'll throw that in before I drive the car for it's check over.

After @NorthloopCup made a very realistic suggestion that the damper rod could be bent at cadwell it gave me the fear so I've had that apart today too and thankfully it's perfectly straight.

IMG_20260717_161651.webp
IMG_20260717_161745.webp


I've also had a quote from a body shop that comes highly recommended, he's said based on the pictures it'll be £700-1000 to repair the damage and paint the passenger side, or in the region of £3500 for a full respray. Something I'm going to have to have a good think over which way I decide to go.

I've also ordered one of them hot glue dent pulling kits from Amazon which is worth a go for the price.. so we'll see if I can improve the dent(s) myself this weekend.

Oh, and this arrived during the week too...

IMG_20260717_183919.webp
 
To be honest the bodywork looks great as is, you’ve done a great job. If you’re still tracking it, I wouldn’t bother getting a body shop. Still cleaner than 90% of 172’s on the road! Glad its minimal.
 
To be honest the bodywork looks great as is, you’ve done a great job. If you’re still tracking it, I wouldn’t bother getting a body shop. Still cleaner than 90% of 172’s on the road! Glad its minimal.

That's the dilemma, I'll definitely get at least the side painted. I do want to get it on track again but It's 99% a road car and I want it to look nice and be something I can be proud of at a meet/show. I wouldn't want to take it anywhere like that the way it is now
 
IMG_20260722_125041.webp


Had the car in for a check over and alignment this morning, front only needed minor adjustment but the rear beam is bent and/or moved over on it's mounts. NSR is toeing out 0.38' and OSR is toeing in 0.19', I was planning on getting the beam blasted and powder coated over winter anyway so I'm not too fussed.

I've just ordered a PMS axle stiffening kit and I've already got some Powerflex black bushes, a full braided hose kit, some stub axle spacers and 1° camber shims ready to go, so once I've managed to buy a spare rear beam I'll get it all built up and swap it over
 
IMG-20260725-WA0008.webp


Picked up this 182 rear beam today, which is a bonus as it's got the thicker/wider stub axles and the additional factory bracing under the spring pans

I've got it all stripped down and bushes out already, hopefully I can 'wfh' on Friday and get it over to the blasters before getting the gussets welded in. I have got a Mig welder at home and can weld to a decent standard but I honestly can't be arsed, I've not used it since I made an engine stand for my last bike build and for what my fabricator charges it's not worth me getting some more gas, another spool of wire and doing it myself.

(I just had to check my camera roll.. it was 2022, time flies 😂)

IMG20220125175821.webp
 
Back
Top