abs

Is this the right part from the front ABS ring on a ph2 172? http://www.ukpartsdirect.com/products/abs-reluctor-rings-1/abs-reluctor-ring-34.html

I was out with a mate earlier on, sitting in the retail Park like a chav having a convo, retail park is the easiest place to park up. I'm not the usual donkey :p. Anyway, as we were sitting speaking, the boy comes in in a non sport, rediculously loud exhaust, and starts spinning the wheels etc...

Had a look around the arch and can't see any obvious connections. Is it somewhere right up in the bay? Thought I'd ask to save me wasting time looking around in the wrong places. Cheers

Had the snap on plugged in an she says wheel speed sensor circuit RR. So instead of spending out on a new sensor I bought a working second hand hub off a mate. Fitted it an no change still all the lights on, cleaned up all the hub cleaned the sensor both ends plus the plug at the front end, am...

I've done a search, but nothing as far as I can see Why do people fit CUP shocks to standard 172s? Just asking as mine needs a refresh, and they seem to be the same price?

After replacing my front wheel bearing at the weekend, the abs sensor appears to have become a casulty of the heat and/or impacts from getting the rust ring and old shell out. The ABS and SERV lights are now on. I took it for a run and all seems ok but thought id try to see what effect having a...

Need to replace my front abs sensor.(warning light has come one since replacing the bearing today). There seems to be a couple of versions, one looks thinner than mine, is this just a different style or a different unit completly. also a possible different connector? It appears the types...

I've got all the bits to remove the ABS on my Ph1 but my friendly MOT man said he won't be able to pass it without the ABS light coming on for a few seconds then turning off because the car came with ABS as standard. Will I have to make something up to turn the light on with the ignition and...

As above, would this be to do with the lamda senor? I've pluged it in but I recall my decated ph1 having a bolt in its place and the sensor out in the open.

Evening Guys and Gals, Has anybody had to replace an ABS sensor on a Megane R26? I'm needing to replace one, just wondering if it would be something I could do at home. Cheers Bark x

Was a member when i was far too young to even think about purchasing an RS, always planned on getting one when i come of age. I'm a huge fan of the mk2 ph1 and the 182, however the price was right on a 197 and its my new pride and joy! Previously owned a golf GTI and it didnt come close to the...

Hi all, my friend is having problems with his 2003 172. We we replaced the rear calipers and rear discs and pads a while ago and ever since after half a mile of driving the SERV ABS ESP STOP and Handbrake symbol all come on. The brakes feel fine and the abs doesn't appear to be kicking in...

Hi all! I have a 05'reg 182. When i bought the car the abs/esp lights were on, read the codes and it came up coherance fault. It needed rear disks and pads so left further investigating until i did that job. Cleared the codes went for a drive and lights back on, same code. Go to live data and...

Hi guys, this last week the abs light and esp light have come on on my 52 plate 172, but they only come on when I go over 30mph,then when I switch the engine off etc an back on they go out, until I go over 30 again, the abs don't kick in etc or cause any problems, also the serv light aint on...

Hello, Yesterday I changed my drivers side Shock Absorber and Coil spring. I thought this went rather well.... However, took the Car out for a drive today, after 20 minutes of driving the Car I noticed a Grinding/ rattling noise had started coming from the Front of the Car. I quickly pulled...

ABS faulty. All cables, rings ok as checked by specialist. Suspected pump 2 options are: 1) To replace with non ABS Cup brakes 2) Replace faulty pump re option 2. I can see that the brake fluid reservoir is on left hand side bulkhead, is the pump behind there as well ? how easy to get to...

Guys The abs light is on in my clio track car. I haven't had a chance to plug it in yet but if the abs light comes on does this then put the brakes into 50/50 distribution and how would this effect the the clio?

Does anyone know the port thread size on the 4 port master? I know the back two are M10x1 but the fronts are bigger, Maybe M12x1?? Also the front and rear calliper port thread sizes if anyone knows would be helpful Cheers

After rewiring the track car the ABS module isn't wired up and the pedal feels different? (Not sure if it is different or if it's just in my head) Want to remove the module but not sure of the best way of doing it. Can the original master be used by pumping the fronts into one port and the...

got an 04 standard 182 noticed now that going over speed bumps it jolts to 1 side so i suspect a rear shock has gone but being a standard 182 would there be much difference if i bought the cup shock absorbers in stead of standard ones ie would they fit ok or does it need to be the standard...

I'm in the middle of replacing half my rear brake setup and stub axles. Changing from non-sport DISC stub axles to 182 stub axles for the extra track width. Anyway, after removing it all I've noticed that the plugs on the abs sensors where they plug in to the cables on the car don't match up...

About 70% of the time when I apply pressure to the brake pedal the brakes seem to lock up and I can feel (on the pedal) and hear a loud shudder. I have to ease a bit of pressure maybe once or twice to stop it when this happens. Worried since I'm more or less a novice. Any help would be kindly...

As the title really. Just pondering! Fitted the whole cup set up to the track car the other day but the smallest pipe has been misplaced at some point. Popped down the scrappys and got one of a non abs 1.2. But I can't remember what my old one ran and I'm just wondering if it would be...

Hi sorry if I post in the wrong section and also if there's is other threads , i just got got my first clio 197 and the traction and abs lights on I'm wondering if there's are common faults and if so where do I start in regards to fixing this , also my wipers only work on auto mode the stalk...

Hi guys. Had a problem with my clio for about a week now the abs has been kicking in at low speeds (abs light doesnt come on though) this caused me to bounce over a kerb yesterday so Iv taken my car into a garage. Theyv suggested that the rear brakes are to blame as they are knackered (theyr...

Just done my widetrack conversion. It was funny that my car registered me as going 70 when I was doing just under 40. Obviously the abs is set up for 26 tooth rings but the sport gear has 44. I've got a clone clip. Can I change a setting in the abs module to read this higher number of abs teeth...

I've got a broke O/S/F abs sensor, is there any where other than Renault to get these. ECP ones fit?

I have a 172 ph1 track car. I'm getting a "boing" noise from the ABS when I come to a halt. Brakes are working fine and I'm not getting the "boing" when applying the brakes, or when in motion, just right at the end when I am almost stopped or completely stopped. Was on track day on Friday and...

One of our DCI's has an ABS problems. Symptoms Pedal farts at lower speeds Can feel judding through pedal at any speed ABS light comes on at 60 mph (goes off when car is turned on and off again, comes back on as soon as you go over 60) Diagnostics cannot connect to the ABS module on clip The...

Guys, Got a 182 track car and for various reasons want to remove the ABS and traction control. for abs is it as simple as a 172 cup master cylinder and running new brake lines with bias valve? Traction control perminate removal?