gearbox

Hey can anyone advise what I’d potentially need to change here... I’ve had an engine replacement and since I can hear the gear selector rod knocking when driving on uneven road. I’ve had a look and it’s very slack. It’s not effecting the gears in any way. Any help be appreciated thanks

Hi all, Wondered if anyone has every used 75w90 in their 172's? Mine will be for fast road/track as a weekend toy and wondered if anyone has ever swapped out the usual expensive GL4 75w80 for something with a larger operating temp. Seen this on eBay and its half the price of Elf stuff...

Hi All, So I think I've just killed gearbox number three. Fifth, Third and Second are whining like hell and will pop out. This rebuilt box (local firm) has lasted about 15k? The last box (KTEC refurb unit) lasted about 15k miles also, that one would whine in all gears and eventually would pop...

Can’t believe this is my first post here. ?? hoped it would have been the (wet side) cv boot but no joy. Two months in to owning my first hot hatch, ph2 172, 125k on the clocks. Gutted. Limped it a mile home. Fair to say this box is dead. Anyone hazard a guess as to what the cause has been...

Hello, I've recently joined the Renault scene with a clio sport 172. So far I've had terrible luck, blew some parts out of the diff casing when I changed into third at 70kmh. So far I have just bought a second hand gearbox to go in, however I can't select any of the gears by hand with the...

Does anyone know if you the gearbox from a mk2/mk3 would fit onto a Mk1 engine? Cheers.

My lovely little (pain the behind) Clio has developed a gearbox oil leak 😧 The car has left lovely little puddles in my garage, on the drive and at work so may have been leaking for a little while. Appears to be coming from the passenger side, was just wondering if anyone has had...

Hi all, Can anyone help me diagnose what's happened to my 2nd gear? The car goes into all other gears fine, pulled away this morning put it into 2nd (was fine) pulled up to a junction then stopped. Pulled away again, 1st was fine, went to go into second and then I physically couldn't get it...

Hiya guys, Just a quick one, what are people's views on the K-Tec stabiliser bar? Would that be a better shout than the powerflex bushes for the original mount?

The car is a 2005 Clio 182 cup..... it jumped out of first gear last weekend and I think it can only get worse. I have a break from competition for a few weeks so now seems a good time to refresh the 'box. I'm thinking of a kit that includes at a minimum some new bearings, synchos and seals...

I've read a lot of posts and can't seem to pinpoint what I'm hearing as everyone keeps going on about he diff bearings. Mine is only when the clutch is engaged in gear. Surely if it was the diff it would make noise regardless due to being connected to the driveshafts. When on the motorway it's...

Hi guys, First post on the forum and sadly its a gearbox issue. I've read through a fair few threads but wanted to put this up and see if anyone can advise me on the potential cause(s). When cold, normally in the morning after she has been sat over night, I can not get the car into gear (any...

Hello, I have a clio cup 2005 Am I correct is saying that I need a jc5 130 box?? Also will the jc5 089 and jc5 129 also fit?? Does anyone have any for sale?? Desperate to find the correct part. Thanks, very much appreciated!

Hey can anyone help me... First of all I get a squeak when I start the engine first time of the day. Usually cold. Then a wee bit before hard lock it will squeak pretty bad I have just done the gearbox and clutch. By dropping the subframe, Now when I'm in say 5th gear accelerate 60-70 then...

Having issues with my electrics tripping out, want to replace the gearbox earth strap (04 182FF) does anyone know what size the bolts holes are? From reading forum saw someone mention 10.5mm for the larger hole. Thanks for any help.

Hi, I'm wanting to rebuild my gearbox in a couple of months, but as my car is going to be used predominantly on rallies I want to upgrade from the current box to something better. Ideally I would go sequential, but I don't think I can afford it (not found someone selling one yet) so I am...

Hi All, Just a quick question really, when changing down gears it feels like they are literally blocked off until you rev the engine a tad and the gears slide in a treat. My first car was a 1.2 8v which did the same. Is this a clio thing or a sign of problems to come?😂 (Evol...

Hey chaps, appreciate people are probably sick of seeing posts on this issue but I would be grateful for any help / advice.. I've had my Clio 200 at the dealer and it's confirmed 4th gear synchro problems as is always the case.. According to RUK because it is 'not a known/common issue' they...

Quick question, I've got the 'normal' gearbox issues when cold, which seems to be much less of an issue if I get pressure into the hydraulic system by pressing the brake pedal firmly whilst selecting 1st gear, on a cold morning. Aside from that, all's good. So, I'm going to get a brake/clutch...

Hi all, Looking to change my gearbox oil as it's done over 100k miles and very much doubt it's been done before. I know I need 3/3.1 litres and 75w-80 Question is what oil should I be looking at? Elf Tranself NFJ 75W-80 any good? Thanks

Hi there, new to the forum but I’m just after a little advice if possible as no one local to me can understand what could be going on with the reverse selection in my Clio 197! So, a bit of a random one but I've recently purchased a Clio 197 which is an amazingly fun piece of kit, but every now...

Hi all, Recently fitted a modified shifter curtesy of @Ash-b-84 and it has been spot on until last night. I'd been driving it earlier in the day and it was fine, I get home, park it on my drive, come to get in it to go somewhere a few hours later and it won't go into reverse. When I pull the...

Morning Guys, I am getting prepared to change my gearbox and clutch over the xmas period on my Phase 1 Clio Sport 172 (still trying to get hold of a JC5-029 gearbox if anyone can supply one?? but clutch is on its way). I have never undertaken a job as big as this on a car before but I am...