Frayz's 550bhp+ Prodrive edition Impreza build...

[frayz]

The Bomber saw a swap to NGK Racing 8 plugs tonight in preparation for mapping. I was delighted with my idea of the removable fuel pump/filter cradle too.
The whole system came out in about 3 minutes, 2x AN fittings, 1x bolt and 1x multiplug and the whole assembly lifts out for easy plug access. The drivers side is merly loosening one jubilee clip and removing the turbo intake.
Also managed to source a USB to serial adapter and could recaliberate teh Innovate wideband to read Gasoline. So with the wideband reading correctly and proper plugs. Shes all systems go for some proper boost.
Woohoo

 

[frayz]

Well, what a day.

To put it blunt the day was amazing... i am delighted... and the car is in short, f'kin ballistic on the road!
Huge thanks to Simon, Charlie and CJ for their work on the car, and a huge thanks to my wingman MADDOG for coming with me.

Ive got heaps of thankyou's to do and say but the bottom line is:

525bhp and 480lbsft on plain Vpower at 1.9 bar.
573bhp and 510lbsft with 20% meth at 2 bar.

 

[Baggaley90]

bloody hell mate, nice!!

 

[LIL B]

Nice.

 

[TheEvilGiraffe]

Poor effort TBH

 

[jesus]

That is an actual weapon. Love it!

 

[K1NGY]

Needs vids TBH

 

[Matt350.]

That is awesome mate, god it must savage when the load pedal is smashed

 

[frayz]

Yeah, power delivery is pretty brutal to be honest.
I've somehow created a monster. Haha.

 

[Daniel]

FPMSL!!!! Thats insane.

 

[Rudi]

those buckets are da rude my friend

 

[frayz]

Here ya go lads, vid was taken on my iPhone, so not the best but you get the idea. This is a 576bhp dyno pull.

We actually had abort a run that was 581bhp and climbing as it was getting a bit too near the mark lol

 

[keo]

Just read all the thread, scoob looks mint. Its made me start looking on pistonheads anyway

 

[LIL B]

f**k standing over the bonnet LOL

 

[dmallett]

That sounds so nice, impressive power too!

 

[frayz]

Thanks for the positive feedback guys

 

[frayz]

Hi chaps,
Been pretty quiet around the forum recently. So just thought id post a little update of some small refreshments on the car.
Rear Brembos have been refurbished in black/yellow to match my APs up front.

Rear diff guard got a freshen up

Rear ARB, brackets and links also got a jolly up with some fresh powdercoat. All fitted up with new stainless fasteners and new rear pads in the calipers.
None of this can be seen i know and there will be lots more going on under here, but at least I know it's all reasonably tidy again for the summer,

Also have some more bits and pieces going on but will update when I have more to show.
Cheers, frayz

 

[Gray]

Such a tidy car.

Love it!

 

[Russ_16v]

Wow thats some power! And that turbo whistle!

 

[uk300matt]

wow!
makes my old uk300 shrink a penis in -20 weather ffs lol.
stunning car and level of work gone into it mate....then theres the bloody low mileage 182 to hate you for too lmao,
look forward to a few more videos mate,fly by/on board ect.

 

[frayz]

Saturday she got a polish up

 

[Matt Cup]

Very nice indeed :approve:

 

[JackJack]

Looks epic when are you fitting the prodrive bonnet vent?

 

[frayz]

Hopefully soon mate. It's being prepped for paint at the mo. Then I'll cut the bonnet and can get it welded and painted.

 

[McGherkin]

Oh my gawd why didn't I see this thread before?

Prodrive Bugeyes FTMFW, favourite year Impreza by far.

I'm a little bit in love with this car. Good job.

 

[joe18two]

I just read thorugh this thread, its an amazing car mate well done. Ive always wanted an impreza Just need to wait for the insurance to drop a bit can't afford it at 24

 

[andywa]

Looks lovely mate. Rapid car!

 

[frayz]

A little ALS video for you.


Frayz-Engineering STI Anti-Lag Test - YouTube

 

[Joe#]

I need a scooby in my life :hail:

 

[jesus]

I want it :dapprove:

 

[frayz]

Took the old girl out for a drive last Saturday and upon coming home I gave her the usual inspection. Found some oil mist on my inner wing that I identified as PAS fluid.

On investigating further I found that my HP PAS line was leaking a small amount of fluid through the core of the hose.
I removed it before it failed, caused a fire or worse.
I took it to my hydraulics shop for a second opinion. They were very helpful as always and put the failure down to heat, and the hose being used slightly outside its rated pressure.
The shop made me up a brand new heavy duty hose there and then free of charge.

I've also been cutting the car up again. Although I'll let the photos do the talking here.

More to come soon

 

[Flat Eric]

Just seen this thread!
Looks great!
I bet it shifts too.

Good bit of work on the bonnet too.

 

[Wayne-G]

Definatley looks the part ! Reg is awsome too Love it!

 

[Lal B3N]

wow! Awesome car.

 

[Jamie86]

Wow, that's all!

 

[Addicted]

That is mental, but I absolutely love it.

 

[frayz]

Cheers guys. Couple more bits to do and she's ready for some paint.
Mesh is just test fitted for now.

 

[Cliotoby]

MOAR

 

[frayz]

Lol, what do you wanna see?

 

[frayz]

Quick snap now it all done on the exterior.

Bonnet removed and stripped for paint.

Now sporting the full on street racer look. Tempted to go for a Fast & Furious style drive. Haha.