Power Tool Perverts

[Krarl]

Aye get the big Milwaukee gun. They're so powerful they can undo anything. Even undo wagon wheel nuts, bad marriages, unwanted children and cheating on your mrs

Ebay have 20% off atm, I messaged @JamesBryan for ideas and I've just spent over £400 in 3 chunks🤦‍♂️😂

 

[adamlstr]

Concrete breakers for garden work, what we saying?

Error 410 | Screwfix

Thousands of products at low trade prices | FREE next day delivery available | 30 day money back guarantee on all orders.

www.screwfix.com

Einhell 15kg 1600W Demolition Hammer

This Einhell demolition hammer is a powerful tool with a robust construction you can count on. Mains-powered and with a single impact power of 43 J, it is rugged enough for any demolition work in homes or out in a garden. An impact rate of 0-1800 bpm will get you through a lot of work in a short...

www.toolstation.com

Been looking at these two, unless anyone’s got any good recommendations?

This is what needs breaking up!

 

[josh11490]

Do you have model numbers?

So much choice, Bluetooth and all sorts of madness [emoji1787]

Sent from my SM-G975F using Tapatalk

 

[Flat Eric]

Concrete breakers for garden work, what we saying?

Error 410 | Screwfix

Thousands of products at low trade prices | FREE next day delivery available | 30 day money back guarantee on all orders.

www.screwfix.com

Einhell 15kg 1600W Demolition Hammer

This Einhell demolition hammer is a powerful tool with a robust construction you can count on. Mains-powered and with a single impact power of 43 J, it is rugged enough for any demolition work in homes or out in a garden. An impact rate of 0-1800 bpm will get you through a lot of work in a short...

www.toolstation.com

Been looking at these two, unless anyone’s got any good recommendations?

View attachment 1529616

This is what needs breaking up!

That'll need some graft on that. Can't you get a mini digger round the back?

 

[Krarl]

Do you have model numbers?

So much choice, Bluetooth and all sorts of madness [emoji1787]

Sent from my SM-G975F using Tapatalk

M18 ONEFHIWF12-502X

That's the one I have

 

[adamlstr]

That'll need some graft on that. Can't you get a mini digger round the back?

I can, but it’ll want a few weekends‘ hire. I don’t mind attacking this in stages tbh. It’s many many skips worth!

 

[Krarl]

You selling the flags? Good money in em if you can break the mortar and stack em

 

[adamlstr]

You selling the flags? Good money in em if you can break the mortar and stack em

Flags? Talk to me like I’m a southerner that only knows about things with circuit boards.

 

[Krarl]

Flags? Talk to me like I’m a southerner that only knows about things with circuit boards.

Paving flags/slabs/stone

If its nice stone its worth a decent penny and would probably pay for your breaker😂 I k ow up here in Yorkshire people steal garden walls when stone gets expensive😂😂

 

[JamesBryan]

Flags? Talk to me like I’m a southerner that only knows about things with circuit boards.

The paving slabs 😂

 

[adamlstr]

Paving flags/slabs/stone

If its nice stone its worth a decent penny and would probably pay for your breaker😂 I k ow up here in Yorkshire people steal garden walls when stone gets expensive😂😂

Put it this way, I’ve had a skip out the front for almost 10 days, and nothing has been added or taken out of it. There’s three metal drain covers laying in full view too. #SouthernFairies

Why not just say slabs? Most are loose, or come up with very little fuss. So I could probably list something locally or on eBay, yeah. That end of the garden hasn’t had any love in about 40 years.

 

[Krarl]

Put it this way, I’ve had a skip out the front for almost 10 days, and nothing has been added or taken out of it. There’s three metal drain covers laying in full view too. #SouthernFairies

Why not just say slabs? Most are loose, or come up with very little fuss. So I could probably list something locally or on eBay, yeah. That end of the garden hasn’t had any love in about 40 years.

1. Get those c***s weighed in
2. Get that skip filled, whenever we get one at work I half fill the c**t with my own s**t 😂
3. Get em lifted, chip the mortar off and bang em on Facebook £1-£2 a pop
4. Get a mini digger, Easter is coming up. We're usually cheeky about it, hire it "for the weekend" knowing full well they wont come and collect it on a bank holiday 😂 (Yes my family are that tight/smart)

 

[botfch]

Concrete breakers for garden work, what we saying?

Error 410 | Screwfix

Thousands of products at low trade prices | FREE next day delivery available | 30 day money back guarantee on all orders.

www.screwfix.com

Einhell 15kg 1600W Demolition Hammer

This Einhell demolition hammer is a powerful tool with a robust construction you can count on. Mains-powered and with a single impact power of 43 J, it is rugged enough for any demolition work in homes or out in a garden. An impact rate of 0-1800 bpm will get you through a lot of work in a short...

www.toolstation.com

Been looking at these two, unless anyone’s got any good recommendations?

View attachment 1529616

This is what needs breaking up!

Not that brand but we’ve got an electric one and it’s pretty good smashed up a concrete slab ok.

 

[Krarl]

Oh and I hate to admit but my Grandad has a Makita breaker, he's full Makita wanker down to an electric strimmer and lawnmower 😂

So yes I do borrow his stupid tools and I hate to admit but they're f**king mint 😂

 

[jonzz]

Mini digger could do that whole garden in a weekend, and you get to play on a digger for a weekend. Win win

 

[jameswrx]

I need a new impact gun

And I'm drawn to milwaukee... there's a few options though, it'll mostly be used for wheels, suspicion parts and general maintenance, ideally 1/2" drive...

I've got a Clarke one that's a bit s**t and won't undo wheel bolts without cracking them first.

Sent from my SM-G975F using Tapatalk

You won’t go far wrong with the milwaukee. They definitely aren’t as solid as the snap on for pro use but I’ll get another one if my snap on 1/2” gun ever dies. If they were the same money I’d get the new snap on one but the price is crazy and no way they’re worth that much more.

I have the 3/8 milwaukee and the battery clips died pretty quick but I’m really hard on my tools. It dropped off my pocket it and the battery doesn’t clip in properly any more.

 

[Krarl]

You won’t go far wrong with the milwaukee. They definitely aren’t as solid as the snap on for pro use but I’ll get another one if my snap on 1/2” gun ever dies. If they were the same money I’d get the new snap on one but the price is crazy and no way they’re worth that much more.

I have the 3/8 milwaukee and the battery clips died pretty quick but I’m really hard on my tools. It dropped off my pocket it and the battery doesn’t clip in properly any more.

Give your head a wobble pal, Snap on stuff is s**t. My Strap on gun couldn't even take head bolts out with a brand new fully charged battery, bag of absolute s**t

I'd say the big Milwaukee would out do most 1/2 air stuff

 

[jameswrx]

Give your head a wobble pal, Snap on stuff is s**t. My Strap on gun couldn't even take head bolts out with a brand new fully charged battery, bag of absolute s**t

I'd say the big Milwaukee would out do most 1/2 air stuff

Yeah, your ‘milwaukee red’ tinted specs are scratched to buggery mate.

The air bit especially, maybe a Lidl one but nothing’s touching air in our garage for outright poke (and I have to use air only prob once a month)

I honestly think my ultimate choice would be the latest Ingersol Rand 1/2” battery gun. Decent quality bit of kit that.

As I say, I have Milwaukee and like it but they’re definitely more fragile feeling than snap on.

The latest snap on gun is a beast. We had one on demo for a bit but it’s quite large.

 

[JamesBryan]

Let's face it, if you need more than what the 1/2" Milwaukee can do for general automotive work, you may as well just cut the c**t off

 

[Krarl]

Yeah, your ‘milwaukee red’ tinted specs are scratched to buggery mate.

The air bit especially, maybe a Lidl one but nothing’s touching air in our garage for outright poke (and I have to use air only prob once a month)

I honestly think my ultimate choice would be the latest Ingersol Rand 1/2” battery gun. Decent quality bit of kit that.

As I say, I have Milwaukee and like it but they’re definitely more fragile feeling than snap on.

The latest snap on gun is a beast. We had one on demo for a bit but it’s quite large.

The "Monster impact" Snap-On sell will do 600ftlb undo... Mine struggled to even touch 300ftlb and it was less than 2 years old and had the gearbox and anvil replaced under warranty

My Milwaukee has already undone 550ftlb headbolts on a Perkins with ease. There's no tinted glasses here pal, not my fault you like being bent over and dryfucked by the strap-on guy

P.s. he's not your mate, he ONLY invites you onto the van so you spend stupid amounts of money on mediocre tools 😂

 

[Flat Eric]

Woah.

You guys clearly haven't seen this impact gun from Milwaukee have you.

That's got to be better than air guns.

Proper overkill but you see the power!

 

[JamesBryan]

The "Monster impact" Snap-On sell will do 600ftlb undo... Mine struggled to even touch 300ftlb and it was less than 2 years old and had the gearbox and anvil replaced under warranty

My Milwaukee has already undone 550ftlb headbolts on a Perkins with ease. There's no tinted glasses here pal, not my fault you like being bent over and dryfucked by the strap-on guy

P.s. he's not your mate, he ONLY invites you onto the van so you spend stupid amounts of money on mediocre tools 😂

The steps

 

[iimushroomzii]

Concrete breakers for garden work, what we saying?

Error 410 | Screwfix

Thousands of products at low trade prices | FREE next day delivery available | 30 day money back guarantee on all orders.

www.screwfix.com

Einhell 15kg 1600W Demolition Hammer

This Einhell demolition hammer is a powerful tool with a robust construction you can count on. Mains-powered and with a single impact power of 43 J, it is rugged enough for any demolition work in homes or out in a garden. An impact rate of 0-1800 bpm will get you through a lot of work in a short...

www.toolstation.com

Been looking at these two, unless anyone’s got any good recommendations?

View attachment 1529616

This is what needs breaking up!

The cheap titan breakers from screwfix will be decent for that. They weight about 20kg though so are quite hard work to use! Actually looking at it, the one I've got is the same as that macallister but badged titan. You cant use them for walls etc horizontally though they're too heavy

 

[Krarl]

The steps

View attachment 1529654

Bet he gets on the truck with no kegs on bless him 😂

"Can I have a posi screwdriver please?"
"Aye of course you can mate, that'll be £80 please"
"Can I finance it pwease?" *dribbles down his tshirt*

 

[jameswrx]

The "Monster impact" Snap-On sell will do 600ftlb undo... Mine struggled to even touch 300ftlb and it was less than 2 years old and had the gearbox and anvil replaced under warranty

My Milwaukee has already undone 550ftlb headbolts on a Perkins with ease. There's no tinted glasses here pal, not my fault you like being bent over and dryfucked by the strap-on guy

P.s. he's not your mate, he ONLY invites you onto the van so you spend stupid amounts of money on mediocre tools 😂

My current snap on man hates me haha, no finance with me. I’ve only ever paid outright and unlike everyone else still have my trusty old Mac tool box.

My old neighbour was a snap on dealer and I used to buy stuff off him cash.

Only stuff I really like from them is the gold coloured torx bits and their ratchets and impact sockets. I even bought two T50 torx bits as I used them on my 1/2” gun with a 3/8” reducer to do transit wheel bearing bolts and thought I’d snap one for sure on site. 10 years later I still have two!

I’d happily have a Milwaukee 1/2” for the money but still don’t think it’d last as long as my snap on gun has from an abuse POV.

 

[JamesBryan]

Snap On ratchets are mega tbf.

The new Milwaukee ratchets look mega, better sealing than Snap On too, but doubt we'll see them out over here

 

[Krarl]

My current snap on man hates me haha, no finance with me. I’ve only ever paid outright and unlike everyone else still have my trusty old Mac tool box.

My old neighbour was a snap on dealer and I used to buy stuff off him cash.

Only stuff I really like from them is the gold coloured torx bits and their ratchets and impact sockets. I even bought two T50 torx bits as I used them on my 1/2” gun with a 3/8” reducer to do transit wheel bearing bolts and thought I’d snap one for sure on site. 10 years later I still have two!

I’d happily have a Milwaukee 1/2” for the money but still don’t think it’d last as long as my snap on gun has from an abuse POV.

Tbf when I sold my snap on gun it did still work and this is coming from the bloke that snapped a Record vice in half 😂 It's a shame that "worked" and "was really good" are 2 different things though 😂 I've learnt in the past few years I need to look after my body and tools so my expensive stuff all has boots on there and I need to stop dropping it from waist height 😂

I just cannot fathom the need for a £950 impact gun that has half the capacity of its competition, some people have more money than sense. I'd much rather have a DeWalt XR than a Snap-On

As for Snap-On ratchets, my mate Adrian had full rollcab of tackle, went to exchange his broken ratchet "sorry mate the ratchet itself ain't covered by lifetime warranty, just the handle, buy a new ratchet mech for £X"... goes back into his unit, he walks back out of his unit a couple of minutes later having snapped his ratchet in half with a pipe and a vice, passes him it and goes "Can I exchange this please" 😂 😂 😂

 

[jameswrx]

Woah.

You guys clearly haven't seen this impact gun from Milwaukee have you.

That's got to be better than air guns.

Proper overkill but you see the power!

Of course I’ve seen it. But have you used a proper 1” lorry air impact gun with the right compressor behind it? It’d spin the Milwaukee back into the recycled coffee stirrers it’s made from.

 

[Flat Eric]

I use a 1/2" dewalt XR at work and it's brilliant to be fair. Only use it for taking out the bolts on a DMF to a crank

 

[botfch]

Bit of an apples to oranges comparison.

The difference between pro consumer tools and professional tools isn’t going to show up unless your using them 24/7.

 

[jameswrx]

Tbf when I sold my snap on gun it did still work and this is coming from the bloke that snapped a Record vice in half 😂 It's a shame that "worked" and "was really good" are 2 different things though 😂 I've learnt in the past few years I need to look after my body and tools so my expensive stuff all has boots on there and I need to stop dropping it from waist height 😂

I just cannot fathom the need for a £950 impact gun that has half the capacity of its competition, some people have more money than sense. I'd much rather have a DeWalt XR than a Snap-On

As for Snap-On ratchets, my mate Adrian had full rollcab of tackle, went to exchange his broken ratchet "sorry mate the ratchet itself ain't covered by lifetime warranty, just the handle, buy a new ratchet mech for £X"... goes back into his unit, he walks back out of his unit a couple of minutes later having snapped his ratchet in half with a pipe and a vice, passes him it and goes "Can I exchange this please" 😂 😂 😂

I’m not about to buy one mate. Crazy money. But if I did have the bucks I’d go for the IR one out the lot of them as they’re really high quality

Have you used the latest Snap on one though? My work mates have the prev model (mine is a really old one) and theirs seem to be unreliable with the batteries being an issue. We had the new one and it’s a beast for power. I’ve had a go with the 3/4” milwaukee which was quite a nice size.

 

[Krarl]

I’m not about to buy one mate. Crazy money. But if I did have the bucks I’d go for the IR one out the lot of them as they’re really high quality

View attachment 1529657

Have you used the latest Snap on one though? My work mates have the prev model (mine is a really old one) and theirs seem to be unreliable with the batteries being an issue. We had the new one and it’s a beast for power. I’ve had a go with the 3/4” milwaukee which was quite a nice size.

Aye my mate has all Snap-On gear because he's lazy, can finance s**t and the guy reverse directly to his unit door. His total bill scares the s**t out of me! I think he said the diagnostic gear he just got was about £5 grand

Those IR look pretty decent, I'd much rather invest in that than the latest Snap-On

 

[jameswrx]

Aye my mate has all Snap-On gear because he's lazy, can finance s**t and the guy reverse directly to his unit door. His total bill scares the s**t out of me! I think he said the diagnostic gear he just got was about £5 grand

Those IR look pretty decent, I'd much rather invest in that than the latest Snap-On

Our snap on diagnostic was £11k I think (comes in a roller chest). But it’s just one way to spend some money in a business. It’s pretty crap too IMO. I brought my laptop in with forscan on as the snap on wouldn’t even work properly on a nearly new transit the other day.

Snap on man’s answer was an offer to sell us another make to “compliment” the snap on!

 

[Krarl]

Our snap on diagnostic was £11k I think (comes in a roller chest). But it’s just one way to spend some money in a business. It’s pretty crap too IMO. I brought my laptop in with forscan on as the snap on wouldn’t even work properly on a nearly new transit the other day.

Snap on man’s answer was an offer to sell us another make to “compliment” the snap on!

Aye I had a Solus and it was s**t, some of the keys didn't work and it wouldn't read any Clio's or Lagunas 😂

Sold it for more than I paid for it hough which was decent

 

[jameswrx]

Aye I had a Solus and it was s**t, some of the keys didn't work and it wouldn't read any Clio's or Lagunas 😂

Sold it for more than I paid for it hough which was decent

This thing is just a £200 tablet in a £200 roller cab with a £100 monitor. Gotta be a big earner for them.

Pretty sure it was £11k (I might be talking bs but can’t find prices and even just the little roller cab box is £3k on eBay without the guts!)

I know they want £600 just for the Bluetooth obd connector. Madness.

 

[Krarl]

This thing is just a £200 tablet in a £200 roller cab with a £100 monitor. Gotta be a big earner for them.

Pretty sure it was £11k (I might be talking bs but can’t find prices and even just the little roller cab box is £3k on eBay without the guts!)

I know they want £600 just for the Bluetooth obd connector. Madness.

Sounds like the same thing my pal has

He stands about most of the day doing f**k all so no idea why he didn't just get CLIP, an Autel and Delphi 😂

 

[leeds2592]

Just brunged a Parkside drill, looks as good as a Nikata and Milwalker, really happy with it

 

[dann2707]

It's payday so can only mean one thing. Another red tool!

*Been looking at one of the high output grinders for a while now. One thing that's always annoying is when I'm welding is if I need to quickly clean up some metal getting the corded grinder out is a faff so this is going to massively help.

Gone for the high output one as after watching shed load of reviews it's significantly better than the smaller one that is more commonly seen. **

Again I've imported this one which came to £177 and its £240 at SGS and PTM.

It takes the sting out of a large purchase when it's under the £200 mark 😂

* poor justification begins
** poor justification ends

 

[botfch]

What is impressive about the battery grinders is how quiet they are vs plug in ones, much nicer to use all day.

I do wish Milwaukee would get on board with the x lock system tho.

 

[MicKPM]

I've got the slightly older brother of this, except wearing Makita trim - There are drawbacks to them but not many. Power Vs Versatility Vs Ability to last (Still talking battery grinders, honest).