What's new
By:
Filters
ClioSport.net

Register a free account today to become a member!
Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

BIGASH/FF-Racing X85 Clio Cup Racer Project



BIGASH

BIGASH

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Cup_Phil said:
If KW actually try to give you the "not for track use" line after they were built to a custom track spec - they need a slap lol
Click to expand...
Haha lol! We will see from what Matt said on Friday KW are just going to replace them but we will see what happens :)
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Heard it loads of times Phil, even when theres nothing wrong with them if you complain about how they perform they normally just say they're not meant for it.

I'd imagine Matt spends a fair bit with them though!
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

AST's seem to be very well proven on the burpspeed car, so seem like a safe option.

Big money though of course, but the suspension is the most important part of any race car really so not an area to worry about costs too much (easy for me to say when its not my money, lol).
 
BIGASH

BIGASH

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Chip-mk1 said:
AST's seem to be very well proven on the burpspeed car, so seem like a safe option.

Big money though of course, but the suspension is the most important part of any race car really so not an area to worry about costs too much (easy for me to say when its not my money, lol).
Click to expand...
Yes that is true they are the safe option which is why I have slight reservations about going with a new make to the Clio market but we will see!

Haha yes but you are right, Should of done it from the start but easy to look back in hindsight and its just one of those things that I need to soak up I think! Live and learn, gosh I've said that a lot recently lol!
 
P

Porkie

  430,911,M3,Exige,Wes
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

I use AST's... its not a racecar, but it gets driven very very hard and I am sure it does ALOT more work and tracktime than most racecars. I've had no problem with them so far.

For a racecar I'd be going with these on a budget I think... or if not what Ian at Godspeed has on his Rally car I reckon. Sexy, strong and at the price he paid, pretty good value! Obviously would be different valving and spring ratings to what he runs I presume. Or what about using what the original cupracers used?
 
BIGASH

BIGASH

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Porkie said:
I use AST's... its not a racecar, but it gets driven very very hard and I am sure it does ALOT more work and tracktime than most racecars. I've had no problem with them so far.

For a racecar I'd be going with these on a budget I think... or if not what Ian at Godspeed has on his Rally car I reckon. Sexy, strong and at the price he paid, pretty good value! Obviously would be different valving and spring ratings to what he runs I presume. Or what about using what the original cupracers used?
Click to expand...
Hi Lee :) Yes I can imagine your car does ;) I don't suppose you know what your spring rates are do you?

The one's Ian run are a very good option although Reiger don't specialise in circuit suspension and mainly the rally stuff so not sure how that would affect things. Also having three way suspension would mean lot's of testing and lot's more money to get running well although I'm sure the end result would be good I don't think I can justify/afford at this stage :(
 
Silent_Scone

Silent_Scone

  Evo 5 RS
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

best way to describe cup racer suspension is to fall on a breeze block on your arse multiple times
 
F

Fred@BTM

  Lionel Richie
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

yeah i thought you had KW competition (cira £3K), using road car stuff on a race car doesn't work!
 
P

Porkie

  430,911,M3,Exige,Wes
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Will ask Mark, I remember Mark changing the rears totally from what it went to him with. Like double as hard!

Think 800 rings a bell?

Maybe give Mark a call yourself. You couldn't be in any safer hands in my opinion.
 
P

Porkie

  430,911,M3,Exige,Wes
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

BIGASH said:
I'm sure the end result would be good I don't think I can justify/afford at this stage :(
Click to expand...

dont blame ya mate :(

As this stage... I would have broken the Clio and bought a Honda if I am honest!
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Porkie said:
Will ask Mark, I remember Mark changing the rears totally from what it went to him with. Like double as hard!

Think 800 rings a bell?

Maybe give Mark a call yourself. You couldn't be in any safer hands in my opinion.
Click to expand...


Bear in mind when considering rear spring rates that the total rear end roll resistance of the car is a function of both the springs AND the ARB add together essentially.

So given that you dont run an uprated ARB on your car, your spring rates that mark has set will be harder than if you did.

And the relationship in terms of roll resistance front to rear as a ratio will alter the dynamics of the car in terms of whether the front or real is what feels looser.

So copying the spring rates from your car without having the rest of the suspension setup the same, could be a bad move.

I am aware you probably realise all this, but just thought that others reading it might not and might rush out to copy that bit of your spec, as springs are very cheap but your overall suspension solution isnt, lol
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Porkie said:
dont blame ya mate :(

As this stage... I would have broken the Clio and bought a Honda if I am honest!
Click to expand...



deadhorse.jpg
 
I

indigorallye

  106
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Hi pal, I had a good nose around your car on saturday.
The level of preparation is a credit to you. Especially the welds on those seat rails :p

It's a shame you're having suspension issues, but stick with it as it will be worth it.
 
BIGASH

BIGASH

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Silent_Scone said:
best way to describe cup racer suspension is to fall on a breeze block on your arse multiple times
Click to expand...
Haha lol! Sounds fun ;)
Fred@BTM said:
yeah i thought you had KW competition (cira £3K), using road car stuff on a race car doesn't work!
Click to expand...
Nope just V2's and the spring rates are really soft! Must of been bottoming out hence shagged! AST's or Nitron's Fred?
Porkie said:
Will ask Mark, I remember Mark changing the rears totally from what it went to him with. Like double as hard!

Think 800 rings a bell?

Maybe give Mark a call yourself. You couldn't be in any safer hands in my opinion.
Click to expand...
Yes would be a good option but was trying to sort it out a bit more local and low cost but as a few people have said it's not really an area to skimp so will have a think :) Thanks mate!
Porkie said:
dont blame ya mate :(

As this stage... I would have broken the Clio and bought a Honda if I am honest!
Click to expand...
Haha I am sat on the floor next to the car and you don't know how tempting it is but I have put too much into it and love it too much when it works to break it :(! I have always said I would never sell it and don't normally give in :)
Chip-mk1 said:
Bear in mind when considering rear spring rates that the total rear end roll resistance of the car is a function of both the springs AND the ARB add together essentially.

So given that you dont run an uprated ARB on your car, your spring rates that mark has set will be harder than if you did.

And the relationship in terms of roll resistance front to rear as a ratio will alter the dynamics of the car in terms of whether the front or real is what feels looser.

So copying the spring rates from your car without having the rest of the suspension setup the same, could be a bad move.

I am aware you probably realise all this, but just thought that others reading it might not and might rush out to copy that bit of your spec, as springs are very cheap but your overall suspension solution isnt, lol
Click to expand...
Yeah I was just wondering for a reference from other setups and gauge what everyone has done with regards to them :)
 
BIGASH

BIGASH

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

indigorallye said:
Hi pal, I had a good nose around your car on saturday.
The level of preparation is a credit to you. Especially the welds on those seat rails :p

It's a shame you're having suspension issues, but stick with it as it will be worth it.
Click to expand...
Thank you :) Haha yes all thanks to Stu!

Yes just one of many issues along the way but i'm sure i'll get it sorted! Thanks

p.s Were you racing the blue 106? :)
 
I

indigorallye

  106
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

I'm only here to spy on you and the BurpSpeed boys.
Need to go back to being incognito...........
 
I

indigorallye

  106
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Here is my video, if you are interested lol!



32mins in should interest you!
 
Last edited by a moderator:
P

Porkie

  430,911,M3,Exige,Wes
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

I actually do have a rear ARB chip. Never been fitted. All yours if you want it for any of your Clio fleet?
 
Tony Hunter

Tony Hunter

  182cup & 172 racecar
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Just had a thought, you guy's with wheel bearing trouble, do you all run with the solid rear beam bearings ? The pure motorsport ones.
 
C

Chip-mk1

  182/RS2/ Turbo/Mk1
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Lol @ fleet, it is starting to get that way, got bloody four of the things at the moment.

Thanks for the offer mate, but TBH Im not a massive fan of rear end roll resistance on these cars, I know its not very fashionable to say so at the moment what with drifting being the coolest thing in the world etc, lol, but I prefer neutral or even very slightly understeery FWD cars to twitchy rear end oversteery ones most of the time (slow tight corners being only exception really like the hairpin at mallory), especially as that sort of behavior can be introduced with a little trail braking anyway when required.
 
BIGASH

BIGASH

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

indigorallye said:
Here is my video, if you are interested lol!



32mins in should interest you!
Click to expand...

Looks good mate :) I will watch the first bit later on! I could see in the distance where me and the proton were tussling :)
Tony Hunter said:
Just had a thought, you guy's with wheel bearing trouble, do you all run with the solid rear beam bearings ? The pure motorsport ones.
Click to expand...
No mine run's a totally standard rear beam Tony :(
 
Last edited by a moderator:
P

Porkie

  430,911,M3,Exige,Wes
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

I'm 10000% with you.... hence not fitted!
 
Cup_Phil

Cup_Phil

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Indigo - good god your car goes well for a 106. You got a build thread for it anywhere? or any more details?
 
IcemanUK

IcemanUK

  BMW Z4
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Chip-mk1 said:
Lol @ fleet, it is starting to get that way, got bloody four of the things at the moment.

Thanks for the offer mate, but TBH Im not a massive fan of rear end roll resistance on these cars, I know its not very fashionable to say so at the moment what with drifting being the coolest thing in the world etc, lol, but I prefer neutral or even very slightly understeery FWD cars to twitchy rear end oversteery ones most of the time (slow tight corners being only exception really like the hairpin at mallory), especially as that sort of behavior can be introduced with a little trail braking anyway when required.
Click to expand...

I agree with Chip on this one. Took my rear ARB off in double quick time as I hated the loose I'm gonna let go and kill you any minute rear end feel. I like a good solid rear end myself :p
 
Nafoff

Nafoff

ClioSport Club Member
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

BIGASH said:
Nope just V2's and the spring rates are really soft! Must of been bottoming out hence shagged! AST's or Nitron's Fred?
Click to expand...

i was going to suggest nitron's,
the chaps there are spot on and they are already into development on the meg's, still yet to do anything on the clio's (as i know)
 
BIGASH

BIGASH

Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

ph-reebone said:
i was going to suggest nitron's,
the chaps there are spot on and they are already into development on the meg's, still yet to do anything on the clio's (as i know)
Click to expand...
Yes I am dealing with Mark at Nitron at the moment, Could be quite interesting but we will have to see what happens! Will update in two weeks when we have more news on them :)
 
P

Porkie

  430,911,M3,Exige,Wes
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

COOL pug :) thanks for sharing the links.
 
Nafoff

Nafoff

ClioSport Club Member
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

BIGASH said:
Yes I am dealing with Mark at Nitron at the moment, Could be quite interesting but we will have to see what happens! Will update in two weeks when we have more news on them :)
Click to expand...

good stuff. this could be interesting
 
Nafoff

Nafoff

ClioSport Club Member
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

BIGASH said:
Yes it certainly could be :) Just got to make sure it's the correct direction to go! The work they do is pretty epic and i'm sure they can produce a really good kit
Click to expand...

as said i talked to them a while back, (over 18months ago) but they wanted to develope the meganne first,
was also speaking to Ohlins at the time who were also very much interested,

will keep an eye here to see how you progress
 
F

Fred@BTM

  Lionel Richie
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

BIGASH said:
Nope just V2's and the spring rates are really soft! Must of been bottoming out hence shagged! AST's or Nitron's Fred?
Click to expand...

Nitron's would get my vote out of those 2, not a fan of AST's at all! Or you could go to LEDA, bilstein (they made the clio cup stuff for the mk2's) give Black Art Designs a call too and have a chat with them, just install a set onto our E36/46 hybrid - sexy stuff!
 
F

Fred@BTM

  Lionel Richie
Re: James/BigAsh 182 Race Car by TDF... It doesn't get much better than this! *Pic He

Chip and Iceman - soft lads the pair of you! sideways is faster in FWD! (well it is the way i drive ;))
 
You must log in or register to reply here.

Similar threads

Tarticmonkey
Tarticmonkey’s Clio 197 CUP Track Car
Replies
8
Views
697
Tarticmonkey
Tarticmonkey
R
Resurrecting a Ph1 Clio 2 (non-RS) in South Africa
Replies
2
Views
188
Razmann4k
R
G
Renault Clio Cup III x85 - Racing problem with losing power
Replies
4
Views
411
GMark
G
J
2001 Clio 172 P1 - Clean OEM Road Project
Replies
20
Views
609
Jaeclio
J
Brigsy
Another one - Sport yellow meg 250 cup.
Replies
28
Views
2K
Brigsy
Brigsy


Top