What's new
By:
ClioSport.net

This is a sample guest message. Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • When you purchase through links on our site, we may earn an affiliate commission. Read more here.

BIGASH/FF-Racing X85 Clio Cup Racer Project

Hi James,

I'd definitely be interested in some of your parts.
Have you sold any of the engine ancillaries? or engine mounts?
What dampers and calipers are you running?
Have you got the master cylinder and bias valve still?

Cheers,
Scott
 
Tomotek said:
Hi James,

I'd definitely be interested in some of your parts.
Have you sold any of the engine ancillaries? or engine mounts?
What dampers and calipers are you running?
Have you got the master cylinder and bias valve still?

Cheers,
Scott
Click to expand...
Hi Scott,

Got all engine ancillaries, got uprated engine mounts :)

Run AST Sportline 2 with custom spring rates i’ve tweaked over the last few years until I was happy and will come with a softer set of rear springs. My Alcons are all sold but I’m in the process of getting some more kits made if you are interested :)

I’ve got a 172cup master cylinder and standard 172 cup bias adjuster but my Tilton one has sold.

Thanks
 
How much would you be after for the steering rack James? I'm only needing the plugs and looped pipe but guessing you'll want to sell as a whole.
 
BIGASH said:
2 sets of 15" OZ ultraleggera's one set orange and the other Matt black. £465 each set

Coilovers are AST sportline 2's my custom spring rates and a spare set of softer rear springs. £1250

Thanks
Click to expand...
Abit to expensive for me mate, I'm sure they'll sell tho
 
Always sad to see this happen but hopefully you will bounce back stronger and some of the parts from this car will live to race another day.

I am just building my race car so would be interested in a bundle of cheap little parts that I will need to get me started and whilst I save up for the big stuff. Any advice?
 
Ph1 Tom said:
Why is there no dislike button on this forum! What rate are the softer rears?
Click to expand...
Haha, 500lb buddy Eibach Brand new in box with helpers and aluminium platforms
scooby-93 said:
Abit to expensive for me mate, I'm sure they'll sell tho
Click to expand...
No worries and thanks for the interest :)
182rich182 said:
What's the condition of the wheels please?
Click to expand...
Let me grab some photos and they will go on the ad this week when it goes up. I know there are no big chunks missing and they are all perfectly straight but they are race wheels so have some little stone chips on probably :)
TarkMalbot said:
Always sad to see this happen but hopefully you will bounce back stronger and some of the parts from this car will live to race another day.

I am just building my race car so would be interested in a bundle of cheap little parts that I will need to get me started and whilst I save up for the big stuff. Any advice?
Click to expand...
Thanks buddy :) I’m sure they will and like I say had such a great time just time to move on!

Complete list will go up with pics this week so just have a gander and let me know if I can help with anything :)
 
BIGASH said:
Thanks buddy :smile: I’m sure they will and like I say had such a great time just time to move on!

Complete list will go up with pics this week so just have a gander and let me know if I can help with anything :smile:
Click to expand...

Ok I will wait for the list. I pretty much need everything as my car is still a road car so looking forward to seeing what you have to offer.
 
This is it coming apart for the last time :(

Had to have one my goofy photo!
ImageUploadedByTapatalk1421237241.817457.webp
 
I had the same feeling when I stripped the track MX5 to pay for the Clio shell :(

Did you get the heated screen working properly in the end btw?
 
Jamie86 said:
I had the same feeling when I stripped the track MX5 to pay for the Clio shell 😧

Did you get the heated screen working properly in the end btw?
Click to expand...
Yes put a new one in a few months ago and needed it a few times works really well! First thing i’ll be doing to the cup racer when it arrives :)
LeeP86 said:
I may have played the funeral march by Chopin in the garage as we started to strip it. @BIGASH didn't see the funny side lol
Click to expand...
:rage::rage::rage: Apart from that mate thanks for keeping a day free to help with it! Productive day :)
 
BIGASH said:
Hi Scott,

Got all engine ancillaries, got uprated engine mounts :smile:

Run AST Sportline 2 with custom spring rates i’ve tweaked over the last few years until I was happy and will come with a softer set of rear springs. My Alcons are all sold but I’m in the process of getting some more kits made if you are interested :smile:

I’ve got a 172cup master cylinder and standard 172 cup bias adjuster but my Tilton one has sold.

Thanks
Click to expand...

Hi James,
How much are you looking for the following:
- Cup master cylinder and bias adjuster
- Engine Mounts

Also, do you still have the following and if so how much are you looking for:
- Oil filter/cooler take off plate (if you ran one?)
- Alternator Mounts
- Water Pump Pulley
- Clutch

Cheers,
Scott
 
Tomotek said:
Hi James,
How much are you looking for the following:
- Cup master cylinder and bias adjuster
- Engine Mounts

Also, do you still have the following and if so how much are you looking for:
- Oil filter/cooler take off plate (if you ran one?)
- Alternator Mounts
- Water Pump Pulley
- Clutch

Cheers,
Scott
Click to expand...
Hi mate

Cup master cylinder will be £70 delivered (Dont have bias I’m afraid)
Engine mounts are vibratechnics so gearbox one and engine one and polybushed doggone mount £165
Oil filter/cooler take off plate (if you ran one?) Sold sorry
Alternator Mounts Sold sorry
Water Pump Pulley Don’t think I have a spare but I will look
Clutch I have got a brand new Valeo that has only done 30 mins use £75 or I have got a 7 1/2 4 paddle race clutch with lightweight flywheel and uprated release bearing £700

Thanks

Ricardos said:
Does the shell have a VIN
Click to expand...
Yes it has V5 that is currently son with the Vin although where should the vin number be? I know the one on the seat rails is gone as I removed them and the dash board one got flocked over lol but I think there is one in the engine bay is it?
 
BIGASH said:
Yes it has V5 that is currently son with the Vin although where should the vin number be? I know the one on the seat rails is gone as I removed them and the dash board one got flocked over lol but I think there is one in the engine bay is it?
Click to expand...

VIN number is in 2 places mate, the dash and the seat rail. Nothing in the engine bay that I've seen when I've had them VIC checked.

To put another VIN number on the car is a piece of piss. Simply print off the VIN number on your mot/registration documents with a dymo and stick it to the roll cage so it can be seen through the screen by an officer of the law/mot tester. It's enough to pass an mot as well. I know it sounds dodgy as fook, but if you were to ever get a pull I think it would be quite obvious the car had been modified for competition and they'd turn a blind eye to it. Plus it's life has been quite well publicised on this forum, so if there was any questions there is always this thread to back your claims.
 
You must log in or register to reply here.

Similar threads

Clart
Clio 182 RB Cup
2 3
Replies
111
Views
13K
Clart
Clart
J
Renault Clio 200
Replies
21
Views
3K
Jamie
J
HemiHusky
Project "Uh Oh" 172 Flame Red
Replies
7
Views
2K
HemiHusky
HemiHusky
Tarticmonkey
Tarticmonkey’s Clio 197 CUP Track Car
Replies
8
Views
3K
Tarticmonkey
Tarticmonkey
R
Resurrecting a Ph1 Clio 2 (non-RS) in South Africa
Replies
2
Views
3K
Razmann4k
R
Back
Top