My 172 CUP By Noos - RIKUS - Kit me up!!

[Noos]

Hi,

It is about time that I Introduce my car to you, there is about 6 month to catch up so lot of pics in perspective...

The car was bought near London in Marsh 2011 and was brought back in France to be transformed into a sleeper Track car...

There is a lot to catch up but as for today, the car is fantactic ! it development carry on and it has got couple of exclusive mod that will make you Jealous!! or not lol :rasp:

My idea is to create a balance road capable ultimate track car...



This how I bought the Car:

Now, just to give you an idea of what is in the car now...( I do not have photos of the whale assembly so you will have to believe my word :quiet: )

- Megane 225 Brembo brake with Carbon loraine RC6.
- Uprated 34mm rear caliper With EBC blue stuff.
- Lighten flyweel.
- Quaif limit slip diferential
- 4/2/1 Clio racing cup stainless steel manifold ( similar to a 182 but better)
- 200cell sport cat
- k-tec 65mm stainless exhaust
- Fast road Via-rouge Track shocks with - 40mm Apex (awesome s**t !)
- Rear camber shims and front camber bolt.
- braided hose front and rear.
- Up rated master cylinder 23.8mm.
- Powerflex mounting bush for the front anti roll bar.
- Powerflex bushing for the engine dog-bone.
- Oil to water heat exchanger.
- K-tec carbon fiber bonnet.
- Uprated spark plug wiring loom.
- Alfano racing Dashboard and track timer.
- k-tec suspension top mount.
- Lot of weight removed :rasp:.
- Carbon fiber rear strut brace.
- Light weight front strut brace.
- racing metal engine protector.
- A frame brake cooler.

Maybe a lot more that I forget lol :clown:


On what's to come....

- JMS RS2 kit with or witout Cams
- Light weight fibre engine protector
- Light weight lexan rear and side windows
- Relocation of battery.
- Uprated anti-roll bar for the front.
- Uprated anti-roll bar for the rear.
- Upgrade to 2piece disc 285mm.
- Upgrade to front A frame/hub racing clio cup specs including drive shaft....




Here you go!!! Who want to see more pics??? say HI Frenchi !!!!

 

[182_sport]

Pic's needed

 

[Noos]

oki, oki :rasp:


So the first thing I did was to trade those ugly 17 inch rims for a set of OZ F1 Black series with new Continental sport contact3 tyre... that would be my, road gear to use when I'm not on the track....

Somebody for some more ???

 

[bozothenutter]

car lookst great man!

 

[182_sport]

Pics of how it looks now?

 

[-J-]

Photos of the Brake set up needed

 

[Nickson]

Photos of the Brake set up needed

This!
Looks better though, good work!

 

[Noos]

Other photos on day light...

1/2 of what I need for my Plug and play brake set up.

specific Renault RAGNOTTI badge that you normally find on the french version of the Cup

K-tec Big boy !

and the set up on the car...

who is here for the next round.... :lol:

 

[182_sport]

Want to see it with carbon

 

[Nickson]

I see Brembo's in the background!

 

[Noos]

Correct ! that car in the background was mine too a that time.... it was sold with Brembos and those ugly 17" rims....

 

[Noos]

The other half of what I needed for my uprated rear big brake: bigger bearing, slitly bigger disk, bigger caliper, an a very good +9mm offset on each side....

Getting the s**t ready.

It 's time to remove the old stuff.

Hop! on the car!

In between I fitted a set of those, I don't know if you guys knows that brand, it is French, it use Bilstein b14 cartridge re-set to they own spec with there own bottom end.... they are absolutely awesome to my purpose!!! the performance is realy like B14, just you can keep you standard spring if you want or just go lower, making them lot cheaper than a set of B14. After trying couple of brand, I'm happy with a set of -40mm apex spring. wich are realy only a -25mm with the weight i removed of the car... :S

Time for some Brembos!!!

the result !!

I hope you like it and want some more !

 

[subarufreak]

nice work!

what do you need for the brembo's on the front? and where can you buy the kit from?

 

[TC.]

Lovely looking motor, think you might have just boosted sales of these...

 

[Noos]

nice work!

what do you need for the brembo's on the front? and where can you buy the kit from?

PM me

 

[Noos]

Lovely looking motor, think you might have just boosted sales of these...

Why ?? , it realy belong in a french version of 172 cup?

 

[Gt rob]

where did you get the brembo adapters?

Ragnotti rules

 

[Matt W]

Are you going to be changing the car registration to French?

 

[Noos]

where did you get the brembo adapters?

Ragnotti rules

I do not know if it is the appropriate place for that but I and a friend are making and selling them as a kit ...

Yes Ragnotti at his age can and will kick ass lol!

Are you going to be changing the car registration to French?

Yes under process already... I'm travelling a lot so i did not complete that task yet...

 

[TC.]

Why ?? , it realy belong in a french version of 172 cup?

Its a nice badge for a smoothed boot or to replace the cup badges on the pillar.

 

[Noos]

Its a nice badge for a smoothed boot or to replace the cup badges on the pillar.

Well, why not ! that could actually look cool :approve:

 

[Gt rob]

will you be selling the kit on here? sooo want brembos. id just need the adapters tho, will source my own brakes

 

[Noos]

will you be selling the kit on here? sooo want brembos. id just need the adapters tho, will source my own brakes

PM

 

[Noos]

Find bellow some other photos of goodies which are in the car....

Quaife :evil:

Plug leads

shims... I've set up the car to a total of 2 degrees negative camber at the rear...

Uprated Master cylinder 23.8mm compare to 22mm (standards)

Sportt cat

Lighten flywheel ... thanks to k-tec

Racing cup manifold....

Powerflex anti-roll bar stuff

:evil:

 

[Jonny1*2]

very nice mate. where did you get the mani from? looks like a 182 one to me :S

 

[Nickson]

Plans look very nice indeed!
Look forward to seeing it finished

 

[-J-]

Looks great, your are certainly spending a Few Euros on some choice parts!

Did anyone else snigger at the Name of the Garage in the photos above? 'Garage Tomauto'

 

[Noos]

very nice mate. where did you get the mani from? looks like a 182 one to me :S

Indeed ! it look like a 182 but it is not... the 182 got a flat spot on one of the tubular to improve clearance with subframe, this one has not, also the racing cup is about 2 to 3 cm longer... and for instance I had to modified the k-tek exhaust to be able to fit it properly.

Plans look very nice indeed!
Look forward to seeing it finished

Except for the plan to come... like the rs2 manifold, the car is kind of finish...

I'm just finally sharing backward in time ...

 

[Noos]

Looks great, your are certainly spending a Few Euros on some choice parts!

Did anyone else snigger at the Name of the Garage in the photos above? 'Garage Tomauto'

Thanks mate!

mehhh that garage.... well that deserve an explanation... it is the only garage I trust! to make it simple.... The owner, a friend, chief mechanic trained with Citroen and Peujot in the national rally championship, even though I'm starting my own structure and performing 95 % of the worked inhouse I ' frequently rely on him when i'm too much busy or just lazy

On the top floor you have, an other friend Marc, specialize in after-market rims... He is the one to thanks for those OZ back special edition, repaired and repainted as they would have come from OZ ... He also the one who found 15 inch rims that would fit on top of my big break set up...

I recommend they if one day you pop in France ...

 

[AdamSmith]

I don't know, poaching one of the 1500 ish Cups left in the UK....

....and making it something special! Awesome.

Very nice toys you've got for it too.

I bet that Quaife made your pockets s**t themselves....

 

[Noos]

LoL, with the amount of pound I leave in the UK, I can't say that I'm not helping the economies LOL

Thanks !

You bet right !!! but now it is super-cars owners who s**t themselves !! they cant figure out why I pass them or why the track team give them a blue flag for a simple Clio .... (I want to say that comparaison was done on normal track, suitable for smaller car, not like F1 tracks)

Quaif is the first modification any Clio 172/182 owners should do first ! it literally transform the car into a corner monster !

 

[Dan]

LoL, with the amount of pound I leave in the UK, I can't say that I'm not helping the economies LOL

Thanks !

You bet right !!! but now it is super-cars owners who s**t themselves !! they cant figure out why I pass them or why the track team give them a blue flag for a simple Clio .... (I want to say that comparaison was done on normal track, suitable for smaller car, not like F1 tracks)

Quaif is the first modification any Clio 172/182 owners should do first ! it literally transform the car into a corner monster !

dont say that i seem to spend enough money without being temptem to spend more haha but a corner monster is what i want

your car to me is awesome i love the brembos and the suspesion setup you have looks awesome do u have a link to check these out??

 

[RB182CUP-FF]

Find bellow some other photos of goodies which are in the car....

Quaife :evil:

Plug leads

shims... I've set up the car to a total of 2 degrees negative camber at the rear...

Uprated Master cylinder 23.8mm compare to 22mm (standards)

Sportt cat

Lighten flywheel ... thanks to k-tec

Racing cup manifold....

Powerflex anti-roll bar stuff

:evil:

hi mate does the cup manifold make any difference when fitted?

 

[Dean.]

Very impressive

 

[Jonny1*2]

Indeed ! it look like a 182 but it is not... the 182 got a flat spot on one of the tubular to improve clearance with subframe, this one has not, also the racing cup is about 2 to 3 cm longer... and for instance I had to modified the k-tek exhaust to be able to fit it properly.

Ah I see. what car is it off? or is it a custom job?

 

[Noos]

It is of a Renault cup but the racing version... and it is custom lol, it is renault custom ! lol

 

[Addicted]

can't wait for the updates it looks like an awesome build!

 

[RB182CUP-FF]

It is of a Renault cup but the racing version... and it is custom lol, it is renault custom ! lol

did the manifold come from renault??

 

[Noos]

did the manifold come from renault??

Correct, Renault competition.

 

[Noos]

dont say that i seem to spend enough money without being temptem to spend more haha but a corner monster is what i want

your car to me is awesome i love the Brembos and the suspension set-up you have looks awesome do u have a link to check these out??

For the Brembos I'm selling those kit

And for the suspensions set up here is the link: http://www.amortisseurs-viarouge.com/

hi mate does the cup manifold make any difference when fitted?

I guess few horse, otherwise why bother , I mean what could be the reason why Renault fit it on the Racing clio ?