incy-spiders Clio 182 turbo

[NorthloopCup]

Wish i got 12k form my helix, i didnt even see half of that :tonguewink:

Sachs clutch looks interesting, but will it do 360ft lb?, im guessing unfortuantely not

I think they're rated quite high mate. Look on the pms website for the details. Not cheap though!!

 

[bozothenutter]

RSX racing solutions one, look them up on Facebook, nice stuff!

was this the onde that required maching to the casing or has that problem been fixed?
very interested in this diff.

 

[incy-spider]

was this the onde that required maching to the casing or has that problem been fixed?
very interested in this diff.

Hi mate, didn't see this... It was a case of very lightly shaving the smallest amount of the rough casting of the inside of the case with a die grinder, probably an area the size of a 1p

 

[incy-spider]

Have a @NorthloopCup roll center kit on the way and some more new AD08r tyres [emoji3][emoji3]

 

[NorthloopCup]

Have a @NorthloopCup roll center kit on the way and some more new AD08r tyres [emoji3][emoji3]

Let me know what you think to the AD08's mate. Considering a set as my road tyres tbh.

 

[incy-spider]

Let me know what you think to the AD08's mate. Considering a set as my road tyres tbh.

Have had 2 sets already, had the original and the R version, I find them to be a very reliable and mega grippy when warm... I know they aren't a 'track' tyre but very at home on the ring and to be fair I don't think you can beat them as an all rounder!

Just paid £340 for 4 delivered in 205/45/16 W so happy with that price! Give them a go... Let me know how you rate them

 

[bozothenutter]

Hi mate, didn't see this... It was a case of very lightly shaving the smallest amount of the rough casting of the inside of the case with a die grinder, probably an area the size of a 1p

Thanks for the info mate!

 

[Dan@SJM]

Let me know what you think to the AD08's mate. Considering a set as my road tyres tbh.

They're f**king awful

 

[incy-spider]

They're f**king awful

Why??

 

[T.Trophy]

They're f**king awful

Really? Was gonna throw a set on the R26

 

[bozothenutter]

First time I've seen someone slating them as awful....was thinking about getting a set to replace the PS3

 

[incy-spider]

First time I've seen someone slating them as awful....was thinking about getting a set to replace the PS3

Yeah that's what I thought, quite keen to know why!

 

[Dan@SJM]

I just found they don't grip, just squeal. I felt the PS3's performed better.

 

[incy-spider]

I just found they don't grip, just squeal. I felt the PS3's performed better.

Road or track?

 

[Dan@SJM]

Both

 

[scotiamr2t]

I've used them on track before and tbh i found them quite grippy for what they are, not a patch on an R888R though

 

[bozothenutter]

Not supposed to be are they....more of a UHP than a Trackday tyre

 

[scotiamr2t]

Not supposed to be are they....more of a UHP than a Trackday tyre

No they aren't, they are just a performance road based tyre. Stood up well to a dry trackday, used them in the wet on track once an they are ok but not overly confidence inspiring

 

[bozothenutter]

No they aren't, they are just a performance road based tyre. Stood up well to a dry trackday, used them in the wet on track once an they are ok but not overly confidence inspiring

isn't that what a UHP tyre is?

 

[incy-spider]

In that case I need to try some track day tyres... I have always thought AD08 were pretty amazing grip wise but may think differently after say some A048

 

[stonejedi]

In that case I need to try some track day tyres... I have always thought AD08 were pretty amazing grip wise but may think differently after say some A048

A048 are a good tire in the dry,but in the wet they can soon catch you out believe me:fearscream:The AD08R is the better all round tire on dry and wet out of the two,and that's coming from hard track/road use.SJ.

 

[incy-spider]

A048 are a good tire in the dry,but in the wet they can soon catch you out believe me:fearscream:The AD08R is the better all round tire on dry and wet out of the two,and that's coming from hard track/road use.SJ.

I'd rather not waste my time driving wet laps of the ring, scared the s**t out if me in the past, pointless!

 

[incy-spider]

So found out with help from @NorthloopCup that a shorter ph1 172 shaft is required to work with my diff, 182 n/s shaft is too long and Judders when cornering hard and going quick into roundabouts.... Just thought I'd post incase anyone is considering one.. Apparently gripper diffs had the same problem [emoji106][emoji106][emoji106]

Fitted the shaft today and it's spot on!!

 

[GrahamS]

So found out with help from @NorthloopCup that a shorter ph1 172 shaft is required to work with my diff, 182 n/s shaft is too long and Judders when cornering hard and going quick into roundabouts.... Just thought I'd post incase anyone is considering one.. Apparently gripper diffs had the same problem

Fitted the shaft today and it's spot on!!

Yeah gripper is the same, only notice it on right handers.

 

[incy-spider]

Yeah gripper is the same, only notice it on right handers.

Yeah you can see little marks where it hits inside the diff cup, after a while I'm sure something would give, casing, diff bearings, shaft bearings etc... Not good!!

 

[GrahamS]

an inner tripod turning to liquid sandpaper. I dread the thought!

 

[incy-spider]

an inner tripod turning to liquid sandpaper. I dread the thought!

Yep, they aren't really designed to be used as a slide hammer!!

 

[incy-spider]

She's getting a feel for the Clio!

 

[Typhoon]

She's getting a feel for the Clio!

That's one way to make a Clio look bigger than a shoebox!

 

[incy-spider]

That's one way to make a Clio look bigger than a shoebox!

Just how a hot hatch should be, unlike modern 'small' hatches

 

[incy-spider]

300mm discs machined with R26r pattern!! Need to get it all fitted now [emoji7][emoji7][emoji1305][emoji1307][emoji97]

 

[incy-spider]

Had to have a play before fitting them!!

 

[incy-spider]

Brakes and roll center kit on... Need to fit tyres and get the pissed geometry set up!!

Little bit annoyed that the pads don't contact the full disc surface, about half inch of unused disc on the inner part, anyone know of a bigger pad or is this not an option??

 

[incy-spider]

Thinking of putting this up for sale, just about to turn 60k miles..... really want a Clio 200 and have seen the one I want. Just don't know if I can do it, also putting a price on this is a challenge!! Thoughts??

 

[Chi]

7k ono BOOOO!!!

Sent from my Wileyfox Swift using Tapatalk

 

[cs_dave]

Brakes and roll center kit on... Need to fit tyres and get the pissed geometry set up!!

Little bit annoyed that the pads don't contact the full disc surface, about half inch of unused disc on the inner part, anyone know of a bigger pad or is this not an option??

Useless on 300mm discs as like you say there no more disc contact.

Selling a boosted one is never easy as they just dont fetch the money

 

[incy-spider]

Useless on 300mm discs as like you say there no more disc contact.

Selling a boosted one is never easy as they just dont fetch the money

I have learned that it's more about the diameter that it's clamping on rather than the surface the pad is in contact with... makes sense!

 

[incy-spider]

Starting to think about getting the Clio ready for the ring in August....

Booked into Phoenix performance exhausts in Cullompton for a custom exhaust soon, popping up to see Chris@efi for a possible tweak on the map to suit if needed on the 29th of April too. Need new track rubber, new 300mm discs, front track pads, rear discs and track pads.

Also going to treat the old girl to some detailing soon!

Exciting [emoji39]

 

[incy-spider]

And we have flames [emoji91] [emoji91]

 

[incy-spider]

Just been reminded of this from my wedding last year, even the Clio was featured as part of my best mans speech from @DV8.... awesomeness!!